Round bag type galvanized dust skeleton production process

The galvanized skeleton frame has a certain welding procedure, and can be completed at one time when welding small components, that is, after welding in a fixed position, assembly is completed with a suitable welding sequence. The assembly and welding of large steel structures require that the small pieces be welded first, and then the final assembly and welding. During component assembly, in order to prevent excessive stress and deformation during the assembly process, different types of parts and components should be made to meet the specification, shape size, and model requirements of the components, and the assembly must not be forced with a large external force. Prevent over-welding of parts and deformation caused by large binding forces.

The production and assembly process of circular-bag-type frame steel structures is a process with different properties and operations. It should be carried out on a standard horizontal surface, and it should be made and processed in accordance with the corresponding methods and methods. The operation platform of the dust-removal framework should ensure that the degree of pressure of the self-weight received is large enough, and the phenomenon of instability and sinking of steel components will not occur, so as to meet the basic requirements for component assembly.

Also, assembly and welding processes precipitator skeleton should uniformly heat welded joints, stress relief and reduce deformation; should be done butt weld gap, groove angle, the size and the lap length of the T-shaped fillet correct and form, The size should be consistent with the design and welding specifications of the components. The welding technology and production of the dust-removal framework must be manufactured and produced in accordance with the correct processing technology, and production in accordance with good forms and characteristics must be guaranteed.