With regard to the function and interior of the Dongfeng 153 compressed garbage truck, we have already had a certain understanding in the front, so today we will focus on understanding the chassis part of this compressed garbage truck. This part is mostly based on data, and you need to know the card. Carefully, don't mess up!
The Dongfeng 153 compressed garbage truck vehicle model CLW5165ZYST4, dimensions: 8310 × 2500 × 3250, using Dongfeng 153 Class II chassis, model EQ1160GKJ1; wheelbase 4500mm, 2-axis.
The engine is a high-grade engine equipped with four Dongfeng Cummins engines, model ISB190 40, with a power of 140,190 hp. Relatively speaking, the horsepower is already relatively large, and it can meet various transportation requirements for compressed garbage trucks. Of course, there are also relatively small engines available.
The girder code is the vehicle identification code, which is also the frame number we often refer to, and is the abbreviation of VIN, the abbreviation of International Vehicle Identification Number. The girder code of the Dongfeng 153 compacted garbage truck is LGHXFG1L7GH204335, which is generally located on the girder under the co-pilot.
The entire vehicle license plate has been accompanied by the vehicle since it was shipped from the factory. In addition to the information mentioned above, the vehicle license plate also includes the total mass of the vehicle of 15,990 kg, the trimming quality of 9,630 kg, and the production date. Each license plate corresponds to a car, or each car has its own license plate, which is similar to our ID card. The difference is that the vehicle license is fixed on the girder on the side of the co-pilot, usually on the rear tire. nearby.
The front suspension is 1250, and the rear suspension is 2560. Multi-piece springs are used and the bearing capacity is strong. The front axle is accompanied by a stabilizer bar, which has better cornering performance; the rear axle ratio is 5.57 and the road is stable.
Ryan DH 261 solenoid valve, voltage: DC 24V, current: 0.55A, pressure: 850Kpa. Electromagnetic control is thus not limited to the two types of control, hydraulic and pneumatic. The desired control is achieved through different circuits, and accuracy and flexibility can be guaranteed.
The two brake gas storage tanks surround the battery around the longitudinal and transverse intersections, and the circuit and gas path are sealed tightly.
Compressed air dryer is mainly used to remove water vapor in compressed air, filter moisture, oil and other impurities, control the role of air pressure (exhaust), and improve traffic safety.
The capacity of the fuel tank is about 200L, and the aluminum alloy fuel tank is not used on the material. Therefore, neither the capacity nor the material is superior, and it is a medium-sized model.
The oil-water separator is connected in parallel with the filter. The former separates the water and deposits it on the bottom of the canister, which is discharged by using a waterproof screw plug. The latter is used to filter out the particulate impurities in the oil. Both provide corresponding protection for traffic safety.
Postscript:
At this point, this Dongfeng 153 compression garbage truck commentary is completed. In general, the value of the Dongfeng 153 compressed garbage truck may be slightly weaker, but it is also a classic model. It is still good in terms of strength. It is not just a strong vehicle carrying capacity, chassis configuration is very real, It is a high allocation. Not humble enough to say that this Dongfeng 153 compact garbage truck can absolutely meet your various needs.
The impeller of the water pump is made of cast iron, and the blades on the impeller play a major role. The shape and size of the impeller of the water pump are closely related to the performance of the water pump. Generally, the impeller of the water pump can be divided into two types: single-suction impeller and double-suction impeller. Most of these types of double-suction impellers are double-suction impellers with both sides absorbing water and large flow. The impeller is the core component of the water pump and the main factor affecting the working efficiency. Under certain working conditions, if the impeller is not well designed, hydraulic loss and clearance loss will occur at the pump inlet and blade. So, we must choose a professional pump impeller manufacturer in terms of selection.
Water Pump Impeller,Stainless Steel Compressor,Precision Casting Water Pump Impeller,Stainless Steel Water Pump Impeller
Baizhu Network Technology Co., Ltd. , https://www.baizhucasting.com