Â
Magnetic drive, no shaft seal design, will not cause chemical liquid leakage easily.
Using FRPP and PVDF material injection molding, is suitable for most chemical acid alkali conveyer.
Optional interface, thread and hose interface, pump shaft with silicon carbide and ceramic material is optional, places to meet different requirements.
Â
| Model | Voltage | Inlet | Flow rate | Lift | Power |
| V | mm | L/min | m | w | |
| MD-6 | 220 | 14 | 8 | 1 | 6 |
| MD-10 | 220 | 14 | 11 | 1.5 | 6 |
| MD-15R | 220 | 14 | 16 | 2.4 | 10 |
| MD-20R | 220 | 18 | 27 | 3.1 | 20 |
| MD-30R | 220 | 20 | 32 | 3.8 | 45 |
| MD-40R | 220 | 20 | 45 | 4.6 | 65 |
| MD-55R | 220 | 26 | 60 | 5.6 | 90 |
| MD-70R | 220/380 | 26 | 86 | 6.7 | 150 |
| MD-100R | 220/380 | 26 | 120 | 8.6 | 260 |
| MD-120R | 220/380 | 40 | 150 | 8.5 | 370 |
| MX-400 | 380 | 40 | 100 | 10.5 | 400 |
| MX-401 | 380 | 40 | 150 | 14.5 | 750 |
| MX-402 | 380 | 50/40 | 200 | 20 | 1500 |
| MX-403 | 380 | 50/40 | 250 | 23 | 2200 |
1, MP (MD), MP (MD) - F series magnetic pump structure compact, absolute leakproof, widely used in various industry, its corrosion resistance and durability and get the praise of users.Main material use manufactured from GFRPP, PVDF, can be used to transport a variety of corrosive liquids.MP (MD), MP (MD) - F series because of its structure is compact, very suitable for used as photographic flushing, plating equipment, PCD liquid circulation.
2, MP (MD), MP (MD) - F series pump maximum flow from 5 to 220 liters per minute, a hose interface and the selection of screw thread interface MP (MD), MP (MD) - F series pump is suitable for acid broken liquid transportation, according to the proportion of liquid and choose a different page wheel, can transport a variety of high proportion of liquid without load.
3, MP (MD), MP (MD) - F series magnetic pump is an attached pages magnet driven wheel and motor axis, unlike traditional centrifugal pump in the structure, without shaft seal.The pump chamber separated by a shell after motor with active magnetic rotation.Republic of active and passive magnetic torque page wheel rotates, so as to realize the liquid transportation.
4, MP (MD) series pump is simple, solid, durable do one of the best magnetic drive pump.
1), motor for solid totally enclosed fan cooled structure, and is a double layer of epoxy coating.
2) MP (MD) series pump and axis of ceramic and ceramic thrust washers, makes the comparison with the same products, run more smoothly and to increase its durability.
3), the pump is no shaft seal design, can supply the material has FRPP, PVDF, CFRPP.
4), the pump can supply of sealing material is VITON, NBR and EPDM.
5), the potion of delivery will not be in contact with the metal parts. Product features
Â
Magnetic drive, no shaft seal design, will not cause chemical liquid leakage easily.
Using FRPP and PVDF material injection molding, is suitable for most chemical acid alkali conveyer.
Optional interface, thread and hose interface, pump shaft with silicon carbide and ceramic material is optional, places to meet different requirements.
Â
| Model | Voltage | Inlet | Flow rate | Lift | Power |
| V | mm | L/min | m | w | |
| MD-6 | 220 | 14 | 8 | 1 | 6 |
| MD-10 | 220 | 14 | 11 | 1.5 | 6 |
| MD-15R | 220 | 14 | 16 | 2.4 | 10 |
| MD-20R | 220 | 18 | 27 | 3.1 | 20 |
| MD-30R | 220 | 20 | 32 | 3.8 | 45 |
| MD-40R | 220 | 20 | 45 | 4.6 | 65 |
| MD-55R | 220 | 26 | 60 | 5.6 | 90 |
| MD-70R | 220/380 | 26 | 86 | 6.7 | 150 |
| MD-100R | 220/380 | 26 | 120 | 8.6 | 260 |
| MD-120R | 220/380 | 40 | 150 | 8.5 | 370 |
| MX-400 | 380 | 40 | 100 | 10.5 | 400 |
| MX-401 | 380 | 40 | 150 | 14.5 | 750 |
| MX-402 | 380 | 50/40 | 200 | 20 | 1500 |
| MX-403 | 380 | 50/40 | 250 | 23 | 2200 |
1, MP (MD), MP (MD) - F series magnetic pump structure compact, absolute leakproof, widely used in various industry, its corrosion resistance and durability and get the praise of users.Main material use manufactured from GFRPP, PVDF, can be used to transport a variety of corrosive liquids.MP (MD), MP (MD) - F series because of its structure is compact, very suitable for used as photographic flushing, plating equipment, PCD liquid circulation.
2, MP (MD), MP (MD) - F series pump maximum flow from 5 to 220 liters per minute, a hose interface and the selection of screw thread interface MP (MD), MP (MD) - F series pump is suitable for acid broken liquid transportation, according to the proportion of liquid and choose a different page wheel, can transport a variety of high proportion of liquid without load.
3, MP (MD), MP (MD) - F series magnetic pump is an attached pages magnet driven wheel and motor axis, unlike traditional centrifugal pump in the structure, without shaft seal.The pump chamber separated by a shell after motor with active magnetic rotation.Republic of active and passive magnetic torque page wheel rotates, so as to realize the liquid transportation.
4, MP (MD) series pump is simple, solid, durable do one of the best magnetic drive pump.
1), motor for solid totally enclosed fan cooled structure, and is a double layer of epoxy coating.
2) MP (MD) series pump and axis of ceramic and ceramic thrust washers, makes the comparison with the same products, run more smoothly and to increase its durability.
3), the pump is no shaft seal design, can supply the material has FRPP, PVDF, CFRPP.
4), the pump can supply of sealing material is VITON, NBR and EPDM.
5), the potion of delivery will not be in contact with the metal parts.
A Semi-Gantry Crane is a Gantry Crane with only one side supporting leg, and the other side is supported on the horizontal structure such as workshop wall. The leg side is traveling on rail tracks laid on the ground, while the other side is traveling on the tracks on the supporting structure.
The main beam of a semi-gantry crane can be a double-girder or a single girder, and the hoisting mechanism can be an Wire Rope Electric Hoist or a hoist/winch on a trolley. The semi-gantry crane is usually used outdoors, also indoors at a large workshop for handling working pieces, bulk mateirals, machines, steel products, scraps, containers, etc.
Capacity: 1t - 500t or custom
Span: 6m - 32m or custom
Lift height: 6m - 32m or custom
Work duty: A4, A5, A6 6m - 32m or custom
Sling device: hook, grab, magnet, disc, spreader or special device for special industry
Packing: wooden case, rain cloth, reinforced bar, etc.
Features of Semi-Gantry Crane:
1. All steel plates are processed by pretreatment production line: Shot blasting – Painting – Paint Drying, Eliminate stress in steel plate, and increase Adhesion between paint and steel plate and anti-corrosion.
2. Adopt Germany Messer plasma CNC cutting machine to cut steel plate with high efficiency and accuracy (±1mm).
3. Rolling drum with seamless steel with pressure 1250t. Auto welding and heavy duty CNC lathe for processing.
4. Double gun gantry submerged arc welding for end beam processing.
5. Welding robot for main beam welding, MAG welding for inside seam welding, Ar+CO2 Mixed protective gas.
6. X-ray flaw detection, Ultrasonic flaw detection for welding seam.
7. High temperature quenching and quenching and tempering treatment for wheels to release internal stress.
8. Annealing furnace (1000mm*4000mm*4000mm) for annealing of trolley, rolling drum, balancing beam, wheel group and spreader.
9. Anti-sway system can be equipped according to customers' requirement.
Semi-Gantry Crane
Semi Gantry Crane,Semi-Gantry Crane,Semi-Gantry Crane Single Girder,Single Girder Semi Gantry Crane
Henan Weihua Heavy Machinery Co., Ltd. , https://www.hoistcrane.nl