According to the investigation by Zhejiang Wenzhou Inspection and Inspection Bureau, the electrical parameters of the batch of LED lighting tubes are 160V~240V, 50/60Hz and 32W. In October 2015, they were shipped to Jordan in two batches, with a total of 3,000 and a value of US$21,300. In June this year, the Jordanian market quality supervision department conducted a spot check and sent the Middle East inspection and technical service experiments. Recently, a number of LED lamps exported to Jordan were unqualified due to random inspection by the local market supervision department. Shipped. According to the investigation by Zhejiang Wenzhou Inspection and Inspection Bureau, the electrical parameters of the batch of LED lighting tubes are 160V~240V, 50/60Hz and 32W. In October 2015, they were shipped to Jordan in two batches, with a total of 3,000 and a value of US$21,300. In June of this year, the Jordanian market quality supervision department conducted a spot check and sent it to the Middle East Detection and Technical Service Laboratory (MELTTS) for testing according to the IEC60598-1:2008 standard. The test results show that the electrical strength of the sample lamp, the terminal connection mark, the cross-sectional area of ​​the wire, the external wiring, etc. do not meet the standard requirements. It is forbidden to sell the batch of lamps in the market, and the importer is required to be destroyed or returned for disposal. After communication and negotiation with the manufacturer, the Jordanian importer returned the unsold 2,053 LED tubes to the back, causing large economic losses to the production enterprises. To this end, the Wenzhou Bureau reminds the vast number of export enterprises: Recently, the requirements of imported products in the Middle East, Africa and other countries and regions have been tightened. For example, Egypt, Sudan, and the Gulf Cooperation Council require that imported products must comply with national mandatory standards or international standards. Therefore, it is necessary to change the inertial thinking of low quality standards for products in Asian and African countries that have been formed over the years. In accordance with the relevant standards and requirements of the importing country, we must strictly control the production management process and strengthen the quality control of the products. Otherwise, it will not only cause losses to enterprises, but also affect the international reputation of China's product quality, and it is necessary to attract high attention.
Hose Assembly,Hose Adapters,Rubber Hose,Swaged Hose Fitting
Jiaxing Master Fitting CO.,LTD , https://www.jiaxingmaster.com