Design standard API 600
Face to face API B16.10
Flange standard API B16.5
Test standard API 598
Chief property and specification
| Test pressue | (Lb)Nominal pressure | Applicable medium | Applicable temperature |
|||||
| 150 | 300 | 600 | 900 | 1500 | 2500 | |||
| Shell strength test | 3 | 7.8 | 15.4 | 23.1 | 38.4 | 64.6 | Water steam oil |
<=425 |
| Seal test(Liquid) | 2.2 | 5.6 | 11.2 | 16.8 | 28.1 | 47.7 | ||
| Seal test(Gas) | 0.5-0.7 | |||||||
Â
| Material of valve | WCB(C) | CF8(P) | CF8M(R) | WC6 WC9(V) | CF3(P) | CF3M(R) |
| Working temperature | <=425 | <=275 | <=275 | <=550 | <=200 | <=200 |
| Applicable medium | Water,steam,oil | Nitric acid | Acetic acid | Water,steam | Acid alkali | Acid alkali |
Company Information
1.Engaged in supply one-stop sourcing,inspection and technical support for overseas customers
2.Help customers to get high cost performance products locally
3.Worked with instituted,help factories to maintain stable quality
4.Good understanding on overseas standards,strong and responsible QCsystem,help factories and customers to avioid releasing non-conformance products
Contact information
If you are looking for this kind of products right now,please do not hesitate to contact us by any of below methods:
Echo Huang  (sales manager)
Web:www.sydensen.com
Â
The plastic bumper is made of plastics, mainly polyester and polypropylene, which are made by injection molding. For example, the bumper of Peugeot 405 car is made of polyester and made by reaction injection molding. Volkswagen audi 100 Golf Shanghai Santana Tianjin xiali model car bumpers, adopted polypropylene materials made from injection molding in Abroad have a called polyethylene carbon ester plastic, seeping into alloy composition, using the method of metal injection molding processing of bumper not only has high strength, rigid, also has the advantages of can welding and coating performance is good, in the amount of cars more and more.
Bumper has safety protection decoration vehicle and improve the aerodynamic characteristics of the vehicle and other functions from the safety point of view, the car can play a buffer role in low-speed collision accident, protect the front and rear body; In the event of an accident with pedestrians, it can play a certain role in protecting pedestrians. From the appearance, it is decorative and becomes an important part to decorate the appearance of cars. At the same time, the car bumper has a certain aerodynamic effect at the same time, in order to reduce the car side collision accident on the occupant of the injury, in the car is usually installed with a door bumper, in order to enhance the door impact force of the collision this method is practical and simple, the body structure of the little change, has been widely used As early as 1993, Honda Accord at the Shenzhen International Automobile Exhibition cut a part of the door to expose the bumper to show the audience, to show its good safety performance The installation of the door bumper is a number of high-strength steel beams horizontally or diagonally placed in the door panel of each door, playing the role of the front and rear bumper, so that the whole car has bumper protection around the front and rear, forming a copper wall and iron wall, so that the car occupant has a maximum safety area Of course, the installation of such door bumpers will undoubtedly increase some costs for car manufacturers, but for car occupants, safety and security will increase a lot.
Black Car Bumper,Black Plastic Bumper Mould,Best Bumper Black Mould,Plastic Bumper Black Mould
Taizhou Huangyan Xingtai Plastic Mould Co., Ltd. , https://www.xingtaimould.com