When installing the inner tube correctly, be careful not to bring sand, granular hard objects and oil impurities into the tire. It is best to apply a layer of light wax or a layer of talcum powder on the inner wall of the tire and the surface of the inner tube to reduce Small friction prevents the inner tube from being scratched. When the inner tube is inflated, inflate and tap the tread with the hammer so that the bead and the rim are in close contact with each other. In addition, the inner tire valve must be aligned with the valve aperture on the steel ring to prevent tearing of the inner tube.
Inflated by the specified air pressure If the tire pressure is too high, the contact area with the ground decreases, the tread wears easily, the cushioning force of the tire weakens, the vibration increases, and even when a large bump is encountered, it may even cause a puncture. If the air pressure is too low, the tire is easily deformed, the rolling resistance is increased, the tire cord is easily delaminated or broken, and the tire is also prone to heat and aging.
Periodically transposition, the tires will be transposed in accordance with the regulations on a regular basis to prevent the tires from being worn out, and the spare tires must also participate in transposition.
Keep tires clean to avoid contact with oil, alkali, acid and other substances. Always flush dirt on tires to keep them clean.
Do a good job with the car maintenance tires should be carried with the car. After the locomotive has been working for a period of time, check the tire pressure and temperature. Every time before leaving the vehicle, check the appearance of the rim, the condition of the valve, and the necessary tire repair tools.
Do not increase the load weight arbitrarily when the load is appropriate. When the load exceeds the maximum load capacity of the tire, the service life of the tire will be shortened.
Starting, shifting and braking without excessive force will not only increase the deformation of the carcass, but will also cause severe friction between the tread and the ground, especially if the road conditions are poor.
Avoid using cold water to cool the tires when it is overheated. Never pour cold water into the tires. Otherwise, it is easy to damage the tires. The correct way is to park the locomotive in the shade to cool it down naturally.
Anti-long-term sun and rain tires suffer long-term sun and rain, will accelerate tire aging deterioration. For long-term parking, the vehicle should be parked in a dry, cool garage and the frame should be erected with wooden stakes or brackets to keep the tires off the ground.
Blister light box is a luminous light box composed of LED light bars and acrylic panels. It is characterized by its unique vacuum shape, more attractive than the LED light box symbol on the plane, and more three-dimensional.The blister light box adopts the three-dimensional luminous character processing technology. Due to the stable quality of acrylic, its products are characterized by good light transmittance, clear farsightedness, high compressive strength, colorfast for more than ten years, and bright as new, which are incomparable with other light boxes and metal characters. It is the best choice for businesses with sustainable business and strong strength.
Round Vacuum Light Box, no corner, looks more beautiful.
Round Vacuum Light Box,Round Light Box Vacuum,Light Box Round Vacuum,Round Acrylic Light Box
Guangzhou Jinshiming advertising equipment Co., Ltd , https://www.jsmlightbox.com