TJD-900 Seed Clarity Bench Instruction Manual

TJD-900 Seed Clarity Workbench

Instructions

I. Introduction

Seed clarity workstations are designed and manufactured based on principles of optical transmission, reflection and amplification combined with electronic technology and ergonomic principles. It is used for the cleanliness of seeds and seeds, and for the determination of rice quality.

The new seed cleanness table (seed clarity table) introduced by the company was developed based on the introduction and reference of similar instruments from the United States. It consists of a three-part integrated system consisting of a transmission light source system, a console, a reflective light source, and an amplification device. The design is more focused on details and more humane.

Seed clarity table soft white surface, uniform reflection, the overall lightweight, placed on the desktop, you can zoom in and observe the measured objects, show its superior performance in the seed cleaning, clarity testing, mainly used in agricultural institutions And seed management stations at all levels, seed companies, food departments and so on.

Second, use method

When using, you need to place the clean degree table on the table, the seeds to be observed on the table, plug in the power supply, turn on the switch, the brightness of the table is soft, and the magnifying glass lamp is illuminated and enlarged from above, which can more clearly observe the seed condition. With two plates, it can be replaced according to different needs. There will be observation with a drawer under the table

The good seed is pulled directly into the drawer. If the seed is to be taken out, the drawer inside the drawer can be unplugged, the vessel can be caught under the hole, and can be brushed out.

Third, pay attention to matters

1. Wipe with a clean bench and wipe with a dry cloth to prevent water from flowing into the internal ballast to prevent internal short circuits.

2. Do not scratch the surface of the table with sharp tools.

3. The internal fluorescent lamp can be replaced. When it is changed, the open bar is pushed into the right and left open holes, and the dark button is opened. The ballast is hidden, as long as the lamp is directly inserted.

Fourth, technical parameters

4. Magnification: 0-7

5. Power: 30W

6. Observation table size: 360Ã—330MM

7. Workbench base size: 940Ã—33MM

8. Light Board Size: 300Ã—270MM

9. Power: 220V 50HZ

Hangzhou Top Instrument Co., Ltd.

Address: 8th Floor, Songdu Building, No. 69 Wangjiang Road, Hangzhou

Telephone service

Service

Sales Phone

Fax

website:

For more relevant instrument instructions, please see: http://