TIG 250p Mosfet AC/DC Inverter Pulse TIG Welding Machine

Posted on

Model NO.: TIG 250P
Trademark: GUBANG
Transport Package: Carton
Specification: 500*335*315
Origin: China
HS Code: 851539000
Model NO.: TIG 250P
Trademark: GUBANG
Transport Package: Carton
Specification: 500*335*315
Origin: China
HS Code: 851539000
Performance and Features:                                                 
  1. Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
  2. Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filler wire welding in bicycle industry.
  3. Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
  4. Has connector to foot control, convenient for workers' operation.
  5. Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
  6. High duty cycle, may work continuously with high current.
Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.        




Parameter/Specification
 
Model Item       TIG 250P AC/DC
Voltage(V) AC220V ±15%
Frequency(Hz) 50-60
Input Power(KVA) 5.8
No-load Voltage(V) 56
Current Range(A) 10-195
Rated Duty Cycle 60%
Applied Welding Rod(mm) ¢1.6-4.0
Pre-flow time(S) 1
Post-flow time(S) 0-10
Down slope(S) 0-10
AC Balance(%) 20-80
AC Frequency(Hz) 60
Pulse Frequency(Hz) 0.5-300
Power Factor 0.73
Efficiency(%) 85
Insulation Grade F
Housing Protection Grade IP21S
Weight(Kg) 20
(L*W*H)(mm) 500*335*315
Carton CBM(m3) 0.115
Specification
 Capacitor 470uF/400V*4
MOSFET 23N50E*12
Output Rectifier D92-02*12






TIG 250p Mosfet AC/DC Inverter Pulse TIG Welding Machine
  Performance and Features:                                                 
  1. Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
  2. Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filler wire welding in bicycle industry.
  3. Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
  4. Has connector to foot control, convenient for workers' operation.
  5. Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
  6. High duty cycle, may work continuously with high current.
Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.        




Parameter/Specification
 
Model Item       TIG 250P AC/DC
Voltage(V) AC220V ±15%
Frequency(Hz) 50-60
Input Power(KVA) 5.8
No-load Voltage(V) 56
Current Range(A) 10-195
Rated Duty Cycle 60%
Applied Welding Rod(mm) ¢1.6-4.0
Pre-flow time(S) 1
Post-flow time(S) 0-10
Down slope(S) 0-10
AC Balance(%) 20-80
AC Frequency(Hz) 60
Pulse Frequency(Hz) 0.5-300
Power Factor 0.73
Efficiency(%) 85
Insulation Grade F
Housing Protection Grade IP21S
Weight(Kg) 20
(L*W*H)(mm) 500*335*315
Carton CBM(m3) 0.115
Specification
 Capacitor 470uF/400V*4
MOSFET 23N50E*12
Output Rectifier D92-02*12






TIG 250p Mosfet AC/DC Inverter Pulse TIG Welding Machine
 

Caterpillar Electrical Parts are popular in the market, the shut off solenoid made by us is the best seller, the quality is high enough to replace the genuine kind, we have quality control management system. Except for the fuel shut solenoid, there are caterpillar starter, alternator, elecric fuel lift pump, fuel transfer pump, and some sensor or sender in our product line. We are a reliable Chinese manufacturer and supplier for these parts.There is also a oversea warehouse in USA. So the deliver time will be very fast while you confirm the orders.

Electrical Parts For Caterpillar

Electrical Parts For Caterpillar ,Caterpillar Electrical Parts,Caterpillar Electronic Components,Caterpillar Electrical Accessories Parts

Hangzhou Holdwell Mechanical&Electrical Co.,LTD , https://www.dieselpart.nl