According to the size of the parts to be processed
The smaller-sized lifting table CNC milling machine has a table width of less than 400mm. It is most suitable for the machining of small and medium-sized parts and the contour milling of complex shapes. For larger specifications, such as gantry milling machines, the workbench is above 500-600mm, which is used to solve the processing needs of large and complex parts.
According to the precision requirements of the machined parts
China has developed the accuracy standard for CNC milling machines, among which CNC vertical milling machine lifting table milling machines have professional standards. The standard stipulates that the linear motion coordinate positioning accuracy is 0.04/300mm, the repeat positioning accuracy is 0.025mm, and the milling precision is 0.035mm. In fact, the machine tool factory precision has a considerable reserve, which is about 20% smaller than the national standard tolerance. about. Therefore, from the perspective of accuracy selection, the general CNC milling machine can meet the processing needs of most parts. For parts with higher precision requirements, you should consider the use of precision CNC milling machines.
According to the processing characteristics of the machined parts
For the machining parts are frame-shaped planes or steps of unequal height, then the CNC milling machine with the point-line system can be selected. If the machining part is a curved surface contour, the system of selecting two coordinate linkage and three coordinate linkage should be determined according to the geometric shape of the curved surface.
According to the requirements of parts processing, on the basis of the general CNC milling machine, the numerical control indexing head or the numerical control rotary table can be added. At this time, the system of the machine tool is a four-coordinate numerical control system, which can process spiral grooves and blade parts.
Choose according to part batch or other requirements
For high volume, the user can use a special milling machine. If it is a small and medium batch, and it is often repeated periodically, then the use of CNC milling machines is very suitable, because the first batch of multi-tools, programs, etc. can be stored and reused. In the long run, the high degree of automation of milling machines replaces ordinary milling machines, and it is inevitable to reduce labor labor and increase productivity.
(Finish)Our solid beeswax taper candles are hand poured using lightly filtered 100% pure beeswax. All of our beeswax tapers are clean burning & dripless. Each hand dipped beeswax taper candle uses a lead-free 100% cotton wick. Our pure beeswax taper candles are classic candles dipped into pure molten beeswax at just the right temperature by a steady hand and a keen eye. They are dipped and cooled over twenty times each before a pair can be cut free from the oak rack. When finished and hung, they carry the rich scent of honey and seem to hold light in their bellies. Kept out of drafts and away from fans these natural beeswax taper candles will burn virtually dripless for about one hour per inch of length.
Hand Dipped Beeswax Taper Candles, Beeswax Dinner Candles, Beeswax Taper Candles Bulk
Shijiazhuang Tabo Candles Sales Co., Ltd. , https://www.tbcandlesgift.com