Pulse electromagnetic valve installation precautions to ensure normal use

1, the best way to install electromagnetic pulse valve is perpendicular to the horizontal pipe, the coil up. In the premise does not agree, allow ± 30 ° tilt. Otherwise, normal use can not be guaranteed. 2, the solenoid valve nameplate parameters should be consistent with the actual use requirements. 3, the arrow on the solenoid valve body should be consistent with the media flow. 4, in order to ensure the normal use of the solenoid valve, please install oil-water separator in front of the solenoid valve. 5, in a hazardous environment to prevent sparks may lead to the occurrence of explosions and other accidents, the use of explosion-proof solenoid valve. 6, before installation, please thoroughly purge air bags and piping to prevent foreign matter damage to the diaphragm caused by the solenoid valve failure. 7, when the solenoid valve fails, in order to promptly isolated and easy maintenance, it is recommended to install bypass (bypass) device. 8, the electromagnetic pulse valve temporarily installed, can be stored at 0 ~ 40 ℃, relative humidity ≤ 80%, but without corrosive gases indoor rotor pump, as far as possible to avoid open storage. 9, after unpacking should first check the use of a single, the factory certificate, packing list is complete. And then check the list of product names, models are consistent, the control nameplate is consistent with the purchase order. If the defect or does not match, should promptly contact with the manufacturers ideas. More keyword search: Solenoid valve

Sneaker Cleaing & Care

The Sneaker Cleaing & Care uses natural coconut oil extract as raw material, which not only has strong decontamination power, but also belongs to a neutral cleaning formula, which does not hurt hands or vamp, and is safe and secure
The product is suitable for cleaning shoes of various materials (mesh shoes, sneakers, woven shoes, sports shoes, canvas leather and other shoes)
1. Remove dirt and debris: Use a soft-bristled brush or a clean cloth to remove any dirt or debris from the surface of the sneakers.
2. Spot cleaning: For stubborn stains, use a sneaker cleaning solution or a mixture of mild soap and water to spot clean the affected area. Use a soft-bristled brush to gently scrub the area and then wipe it off with a clean cloth.
3. Deep cleaning: For a more thorough clean, you can use a sneaker cleaning kit that includes a cleaning solution, a brush, and a microfiber towel. Follow the instructions on the kit to clean your sneakers.
4. Drying: After cleaning your sneakers, let them air dry at room temperature. Avoid using a hair dryer or placing them in direct sunlight as this can damage the material.
5. Protection: To protect your sneakers from future stains and damage, you can apply a water and stain repellent spray. This will help to repel water and prevent stains from setting in.
Overall, it's important to take care of your sneakers to ensure that they last longer and look their best. Regular cleaning and protection can help to keep them looking new for longer.

Sneaker Cleaing & Care,Eco-Friendly Waterproof Spray,Shoe Deo Spray,Air Refresher Odor Removal Spray

Jiangyin yinghuameng Houseware Co.,Ltd. , https://www.nbcare-guys.com