Youngsun select fine glassfiber or Kevlar as basic weaving material, coated with excellent PTFE resin to make it into various PTFE open mesh conveyor belts
Properties:
1. High temperature resistance_It Can continuously work under-140 to 320C, max resist high temperature up to 360C.
2. Permeability_It can avoid wasting heat and improve drying efficiency for it's permeability.
3. Chemical resistance_It can resist all most of chemical medicines.
4. Non Stick_It can easily remove all kinds of adhesives such as resin, paint and chemical
Medicine, easy to clean.
5. Good flex fatigue resistance_It has high tensile strength and excellent flex fatigue
Resistance. It's better for small wheels.
Specification:
| Model | Mesh Size | Material | Thickness | Weight | Temp Resistance | Max Width | Tensile Strength |
| YS-6001 | 1x1mm |  fiberglass | 0.5mm | 370g/m² | -70-320C | 4000mm | 310/290N/cm |
| YS-6002 | 2x2mm | fiberglass | 0.7mm | 450g/m² | -70-320C | 4000mm | 350/310N/cm |
| YS-6003 | 4x4mm | fiberglass | 1.0mm | 400g/m² | -70-320C | 4000mm | 390/320N/cm |
| YS-6004 | 4x4mm | fiberglass | 1.0mm | 450g/m² | -70-320C | 4000mm | 390/320N/cm |
| YS-6007 | 4x4mm | fiberglass +kevlar |
1.2mm | 600g/m² | -70-320C | 4000mm | 895/370N/cm |
| YS-6008 | 4x4mm | fiberglass | 1.0mm | 500g/m² | -70-320C | 4000mm | 395/370N/cm |
| YS-6010 | 4x4mm | Kevlar | 1.0mm | 500g/m² | -70-320C | 4000mm | 900/600N/cm |
| YS-6012 | 4x4mm | fiberglass | 1.0mm | 550g/m² | -70-320C | 4000mm | 395/370N/cm |
| YS-6013 | 10x10mm | fiberglass | 1.2mm | 450g/m² | -70-320C | 4000mm | 360/300N/cm |
| YS-6014 | 0.5x1mm | fiberglass | 0.5mm | 420g/m² | -70-320C | 4000mm | 310/290N/cm |
| YS-6015 | 2x2.5mm | fiberglass | 0.9mm | 600g/m² | -70-320C | 3000mm | 390/320N/cm |
There are many different types of Forged flanges, such as weld neck flange, Plate Flange , Slip On Flange, Blind Flange , Socket Weld Flange, Threaded Flange, spectacle flange (sometimes it is called figure-8 blind flange), lap joint flange and so on.
Main materials are carbon steel, alloy steel and stainless steel. For carbon steel, ASTM A105 & A105N are required by most project.304/304L,316/316L,321,etc belong to stainless Steel Flange . The sealing face of forged flanges in common use is raised face(RF), flat face(FF) and ring type joint(RTJ). As one of largest flange suppliers in China, we commit ourselves to providing best quality and delivery time.
Forged Flange
Pipe Flange,Pipe Flange Types,Steel Flange,High Pressure Steel Flange
CANGZHOU HENGJIA PIPELINE CO.,LTD , https://www.hj-pipeline.com