Pneumatic diaphragm pump is a new type of conveying machinery, is currently the most novel kind of pump. The use of compressed air as the power source, for a variety of corrosive liquids, with particles of liquid, high viscosity, volatile, flammable, highly toxic liquid can be smoked exhausted. This article describes the pneumatic diaphragm pump in the field of practical 6:
1, due to the use of air as the power, so the flow rate with the back pressure (outlet resistance) changes and automatically adjust, suitable for medium and high viscosity fluid. Centrifugal pump operating point is set on the basis of water, if used for slightly higher viscosity fluid, you need to support reducer or inverter, the cost has greatly improved, the same is true of the gear pump.
2, pneumatic diaphragm pump in a flammable environment with pneumatic pump reliable and low cost, such as fuel, gunpowder, explosives delivery, because: First, the ground is not likely to spark; second, no heat generated during work , The machine will not overheat; Third, the fluid will not overheat because the diaphragm pump agitates the fluid to a minimum.
3, poor construction sites, such as construction sites, industrial and mining wastewater discharge, due to the impurities in the sewage and the composition of complex, easy to plug the pipeline, so the formation of the pump on the load is too high, the motor heat vulnerable. Pneumatic diaphragm pump through the particles and the flow rate can be adjusted, the pipeline automatically stop blocked to patency.
4, the other small pneumatic diaphragm pump easy to move, do not need the foundation, accounting for the ground is extremely small, easy and economical installation. Can be used as mobile material transfer pump.
5, in a hazardous, corrosive material handling, diaphragm pump can be completely separated from the outside world.
6, pneumatic diaphragm pump can be used to transport more unstable chemical properties of fluids, such as: photographic materials, such as flocculation. This is because diaphragm pumps have low shear forces and little physical impact on the material.
Pneumatic diaphragm pump in the role of industry is huge, and many difficult to human hand can be completed by the pneumatic diaphragm pump to indirectly ensure the safety of employees.
Hard turbine speed door: set energy-saving insulation and efficient wind environmental seal in a new metal industrial doors , opening speed of up to 1.5meters per second , For applications that require frequent rapid opening of the logistics channel , Insulation thickness 0.7mm aluminum door intermediate polyurethane foam , total thickness 40mm door wide 185mm per meter weight 1.63KG, Having good thermal insulation and light weight impact strength and other characteristics , wind rating of greater than 12 and theft , The door is suitable for indoor and outdoor fast-track logistics and production , The door type for enterprises save a lot of energy due to air flow generated loss than ordinary industrial sliding doors shutter doors save energy about eighty percent , Rapid opening and closing of the door so that enterprises in the rotational speed of the production and logistics of the door is greatly improved enterprise logistics and production must pass through the channel selection and its use is directly related to the efficiency of production and logistics , This product has high reliability , practicality and easy operation and quick fix for me , Drive control using a stable energy-effcient and accurate hard to guarantee fast and reliable operation of the door system the door to ensure trouble-free operation every year more than 250,000 times
Turbine Hard High Speed Door, high speed spiral doors, aluminum high speed door, Aluminum Rapid Door, Aluminum Fast Door
SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfarrd.com