The steel tiles produced by roof tile forming machine look beautiful, elegant and noble. They are widely used as the roof of garden, factory, hotel, exhibition center and villa,etc. The specific sheet profiles can be designed and made in line with customers' specific requirements.
Â
Mainly Components
Hydraulic/ manual decoiler
Cold roll former
Hydraulic punching roof tile device
Hydraulic cutting device
Hydraulic station
Electrical control system
Collecting table
Â
Specification
| Roof Tile Roll Forming Machine | |
| Suitable Thickness | 0.3-0.8mm |
| Raw Material | Coating rolled steel, galvanized sheet, etc. |
| Maximum Coil Weight | 5 ton |
| Forming Speed | 12-15m/min |
| Line Speed | 3-5m/min |
| Shaft Diameter | ¢75mm |
| Shaft Material | 45# steel with heat treatment HRC50-55 |
| Roller Material | 45#, hard Chrome Coated with 0.05mm |
| Transition | Chain and gear |
| Motor Power | 5.5/7.5kw |
| Hydraulic Station Power | 3-5.5kw |
| Material of Blade | Cr12, HRC 58-62, chrome coated |
| Material of Punches | The same as material of blade |
| Cutting Tolerance | +/-1.5mm |
| Forming Station | 24 Stations |
| PLC Control System | Panasonic |
| Encoder | Omron |
| Machine Weight | About 8.5 tons |
Â
The Compabloc is a fully welded compact heat exchanger designed for the complete range of process and utility duties.
The Compabloc range of welded heat exchangers with a focus on perfor- mance, compactness, and serviceability.
The heart of the Compabloc is a stack of corrugated heat transfer plates in 316L stainless steel, or other material. The plates are laser welded and form a compact core. This core is then enclosed and supported by four corner girders, top and bottom heads and four side panels (see Sectional view of Compabloc). These components are bolted together and can be quickly taken apart for inspection, service and cleaning.The design can be configured in single or multi-pass arrangements in either co-current or counter-current operation, for liquid-to-liquid or two-phase duties.
The two media in the Compabloc heat exchanger flow in alternately welded channels between the corrugated plates.
Compabloc's flexible pass arrangements make it suitable for liquid-to-liquid duties with dissimilar flow rates, or two phase condensation or reboiler applications.
Compabloc Heat Exchanger,Full Welded Heat Exchanger Condenser,Welded Compabloc Heat Exchanger,Compabloc Plate Heat Exchanger
Jiangsu Baode Heat-Exchanger Equipment Co.,LTD , https://www.baodeexchanger.com