Jywq Auto-Stirring Residential Area Irrigation Drainage Submersible Sewage Water Pump

>>> Product Overview

JYWQ High Flow Low Head Electric Sewage Pump Submersible Centrifugal Water Pump, which is designed based on the
combination of the advanced technology from abroad and domestic pump performance features. This model has features
such as energy-saving, anti-winding, non-clogging, automatic installation and automatic control. This pump is excellent in
transporting sewage with solid-particles and long fibers.

This pump uses special structure impeller and new mechanical seals to make it more efficient in delivering sewage with
solid particles and long fibers. Compared with traditional impellers, the new ones (spiral-flow type or double-leaf type)
have an excellent delivery capacity, which improves the pump performance. It runs more smoothly without any vibration.

 

 >>> Product Application

1.The discharge of waste water from factories and businesses.
2.Urban sewage treatment plant, hospital, hotel drainage system.
3.The sewage disposal station in the residential area.
4.Human defense system drainage station, water supply device of water works.
5.Municipal works, construction sites.Six.Auxiliary equipment for exploration, mining and power plant.
7.Rural biogas pool, farmland irrigation, hetang desilting.


 

>>> Working Conditions

1, medium temperature less than 60 ºC, medium heavy from 1 to 1.3 kg/dm3, PH value in the range of 4 ~ 10.
2. 1 cr18ni9ti stainless steel material can be used for various corrosive media.

Note: if the user has special medium, temperature and other requirements, please indicate the delivery medium details
when ordering, so that the company can provide more reliable products.
 

>>> Installation Instructions

1.Check whether pump fasteners are loosen and whether the pump body runner is blocked by foreign matters before installation
to avoid damage of impeller and pump body in running.

3.The pump base for both movable and fixed installation must be leveled by a level. After the base is ready, install the pump on
the base and then use a level to check horizontal and vertical situation between the pump and motor shaft. Use the iron shim
to change the height of the base if the pump is out of level. Then grout the base and anchor bolt holes by pouring the concrete
into the grout hole.

4.The levelness of the coupling device should be calibrated by a level when coupling installation is adopted. Horizontal level
tolerance should not exceed 0.1mm/m. Use the measure gage to calibrate parallelism of two coupling rods to ensure the
parallelism tolerance will not exceed 0.2mm/m.

5.Tighten the anchor bolt to make sure there is no looseness between the anchor bolt and concrete in case of bad influence
on pump performance when starting.

7.Rotate the impeller from the suction side after installation. Disassemble the pump and find out the reasons if there is
friction or stuck pump.

8.The pump installation can be divided into three types, movable type, fixed type and coupling type.


1. Pure copper coils-- conductivity is better, the operation efficiency is higher.
2. Cast iron fuselage - good heat dissipation performance.
3.High quality 45SS-Long Life of pump.
4.Impeller - each impeller has been balanced. Ensure the quality.
5.Brand bearings - guaranteed quality.
6.Mechanical seal-Best quality.

For more details , pls contact with us ~

>>> Product Overview

JYWQ High Flow Low Head Electric Sewage Pump Submersible Centrifugal Water Pump, which is designed based on the
combination of the advanced technology from abroad and domestic pump performance features. This model has features
such as energy-saving, anti-winding, non-clogging, automatic installation and automatic control. This pump is excellent in
transporting sewage with solid-particles and long fibers.

This pump uses special structure impeller and new mechanical seals to make it more efficient in delivering sewage with
solid particles and long fibers. Compared with traditional impellers, the new ones (spiral-flow type or double-leaf type)
have an excellent delivery capacity, which improves the pump performance. It runs more smoothly without any vibration.

 

 >>> Product Application

1.The discharge of waste water from factories and businesses.
2.Urban sewage treatment plant, hospital, hotel drainage system.
3.The sewage disposal station in the residential area.
4.Human defense system drainage station, water supply device of water works.
5.Municipal works, construction sites.Six.Auxiliary equipment for exploration, mining and power plant.
7.Rural biogas pool, farmland irrigation, hetang desilting.


 

>>> Working Conditions

1, medium temperature less than 60 ºC, medium heavy from 1 to 1.3 kg/dm3, PH value in the range of 4 ~ 10.
2. 1 cr18ni9ti stainless steel material can be used for various corrosive media.

Note: if the user has special medium, temperature and other requirements, please indicate the delivery medium details
when ordering, so that the company can provide more reliable products.
 

>>> Installation Instructions

1.Check whether pump fasteners are loosen and whether the pump body runner is blocked by foreign matters before installation
to avoid damage of impeller and pump body in running.

3.The pump base for both movable and fixed installation must be leveled by a level. After the base is ready, install the pump on
the base and then use a level to check horizontal and vertical situation between the pump and motor shaft. Use the iron shim
to change the height of the base if the pump is out of level. Then grout the base and anchor bolt holes by pouring the concrete
into the grout hole.

4.The levelness of the coupling device should be calibrated by a level when coupling installation is adopted. Horizontal level
tolerance should not exceed 0.1mm/m. Use the measure gage to calibrate parallelism of two coupling rods to ensure the
parallelism tolerance will not exceed 0.2mm/m.

5.Tighten the anchor bolt to make sure there is no looseness between the anchor bolt and concrete in case of bad influence
on pump performance when starting.

7.Rotate the impeller from the suction side after installation. Disassemble the pump and find out the reasons if there is
friction or stuck pump.

8.The pump installation can be divided into three types, movable type, fixed type and coupling type.


1. Pure copper coils-- conductivity is better, the operation efficiency is higher.
2. Cast iron fuselage - good heat dissipation performance.
3.High quality 45SS-Long Life of pump.
4.Impeller - each impeller has been balanced. Ensure the quality.
5.Brand bearings - guaranteed quality.
6.Mechanical seal-Best quality.

For more details , pls contact with us ~