A large-scale liquor company in Hubei Co., Ltd. made a special boiling Dryer for brewing koji to Jiangsu Zhenxing, and chose the XF series of horizontal boiling dryers for revitalization and drying. Revitalization of the company combined with the specificity of the material, with its special way of feeding and discharging. The material is sealed and has the effect of dispersing and crushing the material. The discharging is quick, convenient and thorough. Boiling dryer machine all corners or welds arc smooth transition, and for mirror polishing.
The principle of Boiling Dryer for distiller's sake. After the air is heated and purified, it is introduced by the induced draft fan from the lower part and passes through the hole mesh plate of the hopper. In the working chamber, fluidization is formed by stirring and negative pressure. After the moisture evaporates quickly, the material is quickly dried as the exhaust gas is carried away.
Boiling Dedicated Boiling Dryer Features The fluidized bed has a round structure to avoid dead angles.
The hopper is set to agitate to prevent the formation of furrows when wet materials are agglomerated and dried.
The use of tipping and unloading is convenient, rapid and thorough, and the automatic feeding and discharging system can also be designed according to requirements.
Sealed negative pressure operation, air flow filtered. Easy to operate, easy to clean.
Drying speed, temperature uniformity, each batch of drying time is generally 20-30 minutes.
The main configuration of the ququ drum drying machine (technical) Features The main machine of the air dehumidification chiller adopts the international advanced semi-hermetic screw compressor, the integration of the motor and the compressor, no consideration of leakage of the shaft seal, the compressor adopts high-performance induction motor, start smooth. The compressor is equipped with a standard configuration, low capacity control and unloading, which can effectively reduce the impact on the power grid. Superior performance, safe and stable operation, low operation and maintenance costs.
Material temperature and steam flow are controlled through the proportional control valve interlocking, which can accurately adjust the steam flow to ensure the active ingredients of the material. The rejuvenating company adopts isobaric hot air distributor and leakage-proof material punching plate, and the hot air is evenly distributed without dead angle. The fluidization effect is good, there is no diffusivity and turbulence, and the drying is uniform.
Revitalize the company's special feed and discharge methods. The material is sealed and has the effect of dispersing and crushing the material. The material discharge is quick, convenient and thorough. Boiling bed dryer host all arcs or welds arc smooth transition, and for mirror polishing.
The equipment is installed in place to clean and sterilize the device, making it easy to clean and disinfect without dead ends and meet the GMP standard requirements.
The powder in the tail gas is recovered and returned to the boiling and drying host. The material is discharged centrally and the exhaust gas is fully discharged.
The air purified by the filter is defrosted and then heated into the drying system to adapt to the season when it is rainy and the air humidity is high. In the premise of low temperature drying, ensure the drying effect.
Under the premise of low-temperature drying, according to the different temperature zones and time periods of the dried materials, the inlet air temperature is controlled to improve the drying efficiency of the equipment and shorten the drying time as much as possible.
The host adopts effective insulation measures, and the system is operated under micro-negative pressure without any dust leakage. The bag dust collector uses the differential pressure meter for synchronous monitoring, and does not affect the stability of the system operation due to condensation of the exhaust gas.
The electrical control system consists of on-site sensors, panels, meters, PLCs, touch screens, control elements, wires, cables, etc. Drying unit adopts PLC program control loop, touch screen animation display process flow, with operability, variable operating parameters (including air volume, air pressure, inlet air temperature, etc.) to achieve fuzzy technology automatic tracking and adjustment to adapt to a variety of materials for a machine Drying requirements.
Dryer Cabinet Stamping Die,Laundry sheet metal fabrication,Dryer cabinet stamping die,Dryer cabinet forming mould,Dryer cabinet punching tool
Wuxi IDO Technology CO.,LTD , https://www.idotechina.com