ISO5660-1 Electrical Lab Instrument Universal Cone Shape Calorimeter Heat Test/Testing Equipment
1. Product Description
Smilating the material in the fire invirement , the buring proformance will used to accesse the flame ability.
Test control systme is composed with temperature control system, Calorimeter radiation tester, signal acqusition system , computer system, circuit system with reasonable test systme design.
Automatic stop safty systme , the a mergecy ooccured ,the machine will recive the signal and stop working.
Convenient operation , and test date storage.
2. Standards
AS/NZS3837 and ISO5660-1
3. Technical Parameters
Â
| Power supply | AC220V±10%, 50Hz or 60Hz |
| Cone heater | Rated power : 5000W; Rated voltage is 230W,; Output heat :100kw/m²;Normal test mode is horizontal use(also can choose the vertical test,that is test sample vertical test mode) |
| Temperature control system | PID temperature control, use 3Â thermocouple to measure the temperature radiation cone, the diameter is 1mm |
| Matching | with one test sample fixture(horizontal) |
| Gas exhaust system | Composed by the fans, hoods, fan intake and exhaust pipes and orifice flowmeter. |
| The flow range of the gas exhaust system | 0.012m3/s--0.035m3/s |
| Containing gas sampling system including | ring sampler, sampling pumps, filters, cold trap, gas drainage, water filters and CO2 filter (optional) |
| With the ignition system | 10kv spark generator (with safety protection device) |
Device structure and basic instructions:
| 1. Power regulator modules, PID temperature control module, air flow circuit control module, mechanical rotating module, human machine interface module, RS485R interface communication module and ARM signal (pressure, temperature, flow, etc.) processing module and programmable logic controller; |
| 2. PC through RS485 interface communication module and programmable controller communication link to carry on the  data transmission and motion control. |
| 3. PID temperature control module is link with the power adjustment module, Through the programmable controller to control the thermostat regulator. |
| 4. Signal acquisition processing circuit module is link with the air volume control module, through the programmable logic controller to calculates the output, smart regulation preset wind speed;Â |
| 5. Mechanical rotating module is link with the programmable controller IÂ / OÂ port, to control the rotation mechanism at the off state. |
| 6. Heating device in the heat release rate test analysis system, through combining the thermal radiation sensor, oxygen, carbon dioxide, carbon monoxide analyzer, smoke density measurement meter, can carry on the heat flux radiation for the uniform quality square test sample, so as to achieve analysis the heat release rate of the material, to obtain a stable concentration of the test sample gas stream. |
Test software system:
| 1. Test control system consists of temperature sampling control system, heat radiation tester, signal acquisition systems, computer systems, together with the rational design of testing and sampling circuit. |
| 2. When the system detects a security signal, it will real-time feedback to the system, it will automatically shut down and to take urgent safety measures. |
| 3. The Signals generated by a thermocouple can through the temperature transmitter or directly transmit to the recorder or to the computer, during the test, the average temperature, single-point temperature can be displayed at any time. |
| 4. Easily implemented the test project to start, the control of the testing process, the setup of the test parameters, all kinds of test data through sensor sampling transported to the computer, after the computer automatically calculate and post-processing, then it can be stored or printed form (graphs). Software can be automatically programmed based on the temperature curve, and record its own furnace, furnace pressure, test sample back temperature and other data. |
| 5. The system provides query functions. The system can automatically store the number of the test sample and the temperature curve and the data in the database, within the system; may enter the number of samples tested, test dates and others to carry on the inquiry. |
| 6. Computer, laser printer (choose to match) and software systems. |
The test data including:
| 1. Heat release rate |
| 2. Igniting time |
| 3. Critical ignite heat |
| 4. Mass lose rate |
| 5. Smoke production loss rate |
The main configuration:
| 1. Imported water-cooled heat flow meter(Choose to matching) |
| 2. Cooling water temperature range is 10~30ºC |
| 3. Cooling water flow >10L/hour |
| 4. Test range kW/ m²:100 kW/ m² |
| 5. Reaction time is <250ms(63%) |
| 6. Security alarm system (temperature overheat alarm, gas leak alarm and leakage security protection) |
Smoke measurement system parameters:
| 1. Detector Chromaticity standard accuracy is ± 5%, output linearity (transmittance rate) is <3%, absolute transmittance rate is <1% |
| 2. Source: quartz bulb 100W/DC12V |
| 3. Device can provide (12.0 ± 0.1) V regulated power supply |
| 4. The output impedance of the smoke density test cells and dust protection tube is less than 100Ω. |
| 5. Placed the light source and the receiver on the top middle position between both side of the exhaust pipe, and not in direct contact with sealed windows, the light beam can through the both sides fireproof windows to pass the exhaust gas pipe to test the gas exhaust smoke density. |
| 6. Photocell mounted at one end of the tube( (175 ± 10) mm, the other end is the dustproof window |
| 7. Automatic be calibrated, adjust the flux of zero (0%) and full-scale (100%); equipped with a set of standard filters |
| 8. The Curve can be displayed on the computer |
4. Advantages
core competence
Customized ServicesÂ
To fulfill the diversified needs for clients, we gain experience of research and achieve flexible production.
Standard MasteryÂ
Extensive experiences of customized business and understanding of each standard.
Thorough ServicesÂ
Serving with a grateful, professional and honorable attitude, we established our own independent service branch to provide you with long-term value adding services.
Experienced R&D TeamÂ
Extensive experiences of Research and Development for mechanics, electronics, optics, thermology, IT technology and customer services.
Overall MatchingÂ
Solutions provider for laboratories based on standards or functions required.
Our customers
5. Certificates
6. Foreign Friends Visiting
7. Related Products
8. Company Profile
Guangzhou Sunho Testing Equipment Co.,Ltd is the company integrating in design, research, manufacture, sales and after sales-service, belonging to high-tech enterprises.
Sunho company extensive research and development experiences regarding safety performance testing, electromechanical properties testing, fireproof and flame retardant performance testing, waterproof performance testing and life testing for the household electrical appliances, electronic and electrical products, electrical accessories, building components and materials, wire and cable, IT computer and communications, children's toys and textiles, power simulate load and capacitor and so on.
Also manufacture the testing equipment for all kind of products, sampling laboratory and line automatic detecting system.
With the nationally recognized testing instrumentation production license. More than 1000 kinds of products.
9. Packaging &Â Shipping
Packaging: Wooden Box
Shipping: ocean
Transport port: Guangzhou or Shenzhen port or Customer's required
10. Payment &Â Delivery
Payment: T/T, money Gram, Paypal, Western Union
Delivery: 10-40 days received the deposit.
11.FAQ
1) Why choose us?
Customized Services: To fulfill the diversified needs for clients, we gain experience of research and achieve flexible production.
Standard Mastery: Extensive experiences of customized business and understanding of each standard.
Thorough Services: Serving with a grateful, professional and honorable attitude, we established our own independent service branch to provide you with long-term value adding services.
Experienced R&D Team: Extensive experiences of Research and Development for mechanics, electronics, optics, thermology, IT technology and customer services.
Overall Matching: Solutions provider for laboratories based on standards or functions required.
Guangzhou Sunho Testing Equipment Co., Ltd is engages and specialized in TESTING EQUIPMENT with good quality and pretty competitive prices for more than 10 years, belonging to the high-tech enterprises. We always pursue the perfection with you.
2) What kind of your corporation?
We're the China testing machine manufacturer and trader.
3) What's your delivery time?
Normally, it is 10-40 days according to the unload port.
12.Contacts
Mr David    Mobile Phone: +86 18218458603    Â
Miss Kwai  Mobile Phone: +86 18122277847
Tel: 86-20-89224225Â Â Â 86-20-84282978
Fax: 86-20-39939307
Postcode: 511430
Website: http://www.sunhotest.com/
Address: NO 101 First Floor Block F, Shibei industrial park, Shibei industrial avenue, Dashi street, Panyu, Guangzhou,China
Thixotropic agent is a highly effective mineral rheological agent, which can be used with cellulose ether to improve the constructibility and resistance to flow in polymer mortar products. When added to the Resin, it can make the resin glue liquid have a higher consistency at rest and become a fluid substance of low consistency under the action of external force.
Our company has a perfect sales network, fast logistics services, deep cultivation of new material industry, and actively expand business at home and abroad. We strive to find thousands of positions in the world's new materials industry.
Thixotropic Agent,Thixotropic Agent For Epoxy,Silica Fume,Unsaturated Polyester Resin Thinner
Jiangyin Thousands Chemicals Co. , https://www.wqhxcomposite.com