Technical Parameter: 50Hz
Flow: 2 - 160m3/h;
Head: 24 - 1000m;
Power: 1.1 - 110kw;
Speed: 2900r/min;
Calibre: 25-150mm;
Temperature range: -15ºC - +120ºC.
Range of Application:
1. Water supply for domestic
2. Fire control purposes in high-rises
3. Transportation of circulating cold water in air- conditioning system.
Product Introduction:
This pump is the latest type, which is characterized by energy saving, space effective, easy installation, stable performance and so on. The casing is made of 1Cr18Ni9Ti top-grade stainless steel while the shaft gland adopts the abrasion-resistance mechanical seal with zero leakage and a long serice life. It solves the axial force with the hydraulic balance so that the pump has stable running with low noise. Its installation conditions are more favorable than those of DL pump because it can be easily installed in the middle of a segment of horizontal pipeline. It can fully meet the need for the water supply and drainage of high-rise buildings, deep wells and mines and the like as well as for the fire fighting facilities. Therefore, it is the optimal type to transport cold and hot water, general media or other liquids with similar physical and chemical properties as water in all major industries.
Type Designation:
50 GDL 12 - 15× 5
50 - Diameter of pump inlet and outlet (mm)
GDL - Vertical Multistage Pipeline Pump
12 - Flow capacity (m3/h)
15 - Lift head of single-stage (m)
5 - Stage number
Purpose:
  DL vertical multistage centrifugal pump can widely used to high-rise fire fighting, urban supply, air-conditioning circulating unit and cooling water transported.
Structure:
Â
NO | Components | Remark |
1 | Vertical motor | Â |
2 | Motor base | Cast iron |
3 | Roll bearing | Â |
4 | seal | Stuffing or mechanical seal |
5 | Above bearing | Brassiness |
6 | Tighten bolts | 45#steel |
7 | Outlet section | Cast iron |
8 | Stable key | 45#steel |
9 | Â | Cast iron |
10 | impeller | Cast iron |
11 | Paper packing | Â |
12 | Middle section | Cast iron |
13 | Seal ring | Â |
14 | Shaft | 45#steel |
15 | Impeller nuts | Brassiness |
16 | Lower bearing | Brassiness |
17 | Lower shaft sleeve | 2Cr13 |
18 | Seal pad | Â |
19 | Hole gland | Cast iron |
20 | Tighten bolts | Â |
21 | Inlet section | Cast iron |
Â
Technical Parameter: 50Hz
Flow: 2 - 160m3/h;
Head: 24 - 1000m;
Power: 1.1 - 110kw;
Speed: 2900r/min;
Calibre: 25-150mm;
Temperature range: -15ºC - +120ºC.
Range of Application:
1. Water supply for domestic
2. Fire control purposes in high-rises
3. Transportation of circulating cold water in air- conditioning system.
Product Introduction:
This pump is the latest type, which is characterized by energy saving, space effective, easy installation, stable performance and so on. The casing is made of 1Cr18Ni9Ti top-grade stainless steel while the shaft gland adopts the abrasion-resistance mechanical seal with zero leakage and a long serice life. It solves the axial force with the hydraulic balance so that the pump has stable running with low noise. Its installation conditions are more favorable than those of DL pump because it can be easily installed in the middle of a segment of horizontal pipeline. It can fully meet the need for the water supply and drainage of high-rise buildings, deep wells and mines and the like as well as for the fire fighting facilities. Therefore, it is the optimal type to transport cold and hot water, general media or other liquids with similar physical and chemical properties as water in all major industries.
Type Designation:
50 GDL 12 - 15× 5
50 - Diameter of pump inlet and outlet (mm)
GDL - Vertical Multistage Pipeline Pump
12 - Flow capacity (m3/h)
15 - Lift head of single-stage (m)
5 - Stage number
Purpose:
  DL vertical multistage centrifugal pump can widely used to high-rise fire fighting, urban supply, air-conditioning circulating unit and cooling water transported.
Structure:
Â
NO | Components | Remark |
1 | Vertical motor | Â |
2 | Motor base | Cast iron |
3 | Roll bearing | Â |
4 | seal | Stuffing or mechanical seal |
5 | Above bearing | Brassiness |
6 | Tighten bolts | 45#steel |
7 | Outlet section | Cast iron |
8 | Stable key | 45#steel |
9 | Â | Cast iron |
10 | impeller | Cast iron |
11 | Paper packing | Â |
12 | Middle section | Cast iron |
13 | Seal ring | Â |
14 | Shaft | 45#steel |
15 | Impeller nuts | Brassiness |
16 | Lower bearing | Brassiness |
17 | Lower shaft sleeve | 2Cr13 |
18 | Seal pad | Â |
19 | Hole gland | Cast iron |
20 | Tighten bolts | Â |
21 | Inlet section | Cast iron |
Â
Various kinds of industrial control cabinets for customers are customized, which are mainly divided into strong electric control cabinet, weak current control cabinet, all kinds of single machine control cabinets and all kinds of single machine control cabinets.
The strong electric control cabinet has modular combination electric cabinet, GGD control cabinet, PLC control cabinet and so on. The weak current control cabinet adopts special PVC material to make the process simulation screen, which can clearly and intuitively reflect the operation process and facilitate monitoring.
The user can choose the control mode combined with the central control of the analog screen and the computer control ingredients or the computer complete screen control mode.
Electronic Control,Electric Control System,Power And Control Systems,Control System
XinxiangHexie Feed Machienry Manufacturing Co.Ltd , https://www.hxfeedmill.com