Abstract: Hohhot News Network July 14th, July 13th, the reporter learned from the Hohhot Environmental Protection Bureau, in order to further improve the prevention and control of motor vehicle exhaust pollution, strengthen and standardize the regular inspection of the motor vehicle environmental protection in the capital, and comprehensively improve the capital of the capital Quality Since the beginning of this year, the Environmental Protection Bureau of Hohhot has continuously strengthened the efforts in the prevention and control of motor vehicles. Up to now, a total of 138,520 vehicle exhaust gas detection tasks have been completed, and 24,450 vehicles with excessive exhaust gas have been effectively treated, and the pass rate of governance has reached over 95%.
On July 13, the reporter learned from the Hohhot Environmental Protection Bureau that in order to further improve the prevention and control of motor vehicle exhaust pollution, strengthen and standardize the regular inspection of the motor vehicle environmental protection in the capital, and comprehensively improve the air quality of the capital. Since the beginning of this year, Hohhot Environmental Protection Bureau Constantly strengthen the efforts of prevention and control of motor vehicles in use. Up to now, a total of 138,520 vehicle exhaust gas detection tasks have been completed, and 24,450 vehicles with excessive exhaust gas have been effectively treated, and the pass rate of governance has reached over 95%.
It is understood that the Environmental Protection Bureau of Hohhot has achieved scientific scientific research on the prevention and control of motor vehicles by fully implementing the management of environmentally-friendly signs, the regular inspection of motor vehicles in use, the law enforcement inspection of yellow-label vehicles, and the comprehensive management of oil and gas recovery. At the same time, the bureau also implemented online monitoring and management of motor vehicle exhaust detection, realizing real-time uploading of data, video and pictures and environmental audit management.
Install adjustment:
1.The screw conveyor can not be installed until the dust stuck during transportation or unloading
is cleaned.
2.Material groove center line and screw shaft should have an appropriate coaxial degree.
3.The drive device and the screw shaft should have a right coaxial degree.
4.The static equilibrium test should be carried out after the screw is installed.
5`After the conveyor installed, check whether there is any debris in the machine and if the lubrication is enough.
6.During the no-load test, the bearing should be oil-tight, and the bearing temperature should not be higher than 20℃. During the load test,the temperature of bearing should not exceed 30℃.
Attentions
(1) Lubricate the bearings, gears, chains and other transmission parts regularly.
(2)When the box-to-send machine stopped, check the abrasion of the spiral blade and repair and weld it when it wears seriously.
(3)The conveying amount can not be overloaded, otherwise the material will not be discharged, which may cause the screw shaft bending and box expansion.
(4) In the operation of the conveyor, if the noise is harsh, you should open the lid to check it and troubleshoot.
Flexible Screw Conveyor,Small Screw Conveyor,Cement Screw Conveyor
Zhengzhou XinFeng machinery manufacturing Co. Ltd , https://www.xfmachinery.com