Stacked gate, also known as stacked beam valve, stacked beam door is the use of multiple separate gate, each block transversely into the door slot stacked into a flat water retaining structure. Girder gate to rely on their own weight and rubber water stop to achieve the purpose of sealing. Generally consists of more than two overlapping gate made of. In the next gate or gate, a block into a piece or taken out, the use of lower frequency, but the overall light, not easy to deformation, even if idle for a long time before use, to ensure good water stop, water leakage. The height of each ram must be the same, each block is basically the same shape, each block has raised and groove (or mouth), bumps and grooves inlaid with water tape, so that can be stacked one by one Get up to the level you need, with little or no leakage. Each ram also has two pull rings, easy to drop or remove. Slotted steel plate folded into [trough shape, and the channel embedded steel welded installation. Rely on the stack brake installed on the spring and the role of water pressure, water tight rubber seal with the gate close fit, sealing effect is good.
Snake Tube,just as its name implies,it is sinuate tube,also called as serpentuator, serpentine tube or S-shaped tube,which is widely used in ESS(energy storing device), battery cooling of electric vehicle, solar energy collector etc.
Because snake tubes` shape is flexible, which can be designed according to the required cooling products, the more contacting area with products, the better heat exchanging.
Furthermore, the main structure of snake tube is extruded tube. We have our own tooling plant and lots ready toolings, which greatly reduced their cost.
snake tube for ESS,snake tube for energy storage,serpentine tube for battery pack
Trumony Aluminum Limited , https://www.szaluminumsheets.com