High frequency welding machine is a strip as raw material, after uncoiling, molding, high frequency welding, sizing, straightening, cutting off a series of pipe forming process to produce complete sets of equipment or a variety of circular steel tube steel pipe line.Â
Roll forming is used to make the strip cold bending into round billet, and the welding seam is extruded to form round tube by high frequency induction heating. Various standard tubes and square tubes are produced after sizing.
Â
Fixed tube heat exchanger consists of tube bundle, tube plate, shell, head, folded plate, etc. Tube bundle ends fixed in the tube plate, the tube can be expanded (the inner hole of the tube with mechanical expansion, so that the tube wall from the inward to outward extrusion and fixed in the tube plate) or welded to the tube plate. The tube bundle is placed within the tube shell, with headers and flanges fixed at both ends. In this way, one fluid flows from the inside of the tube and the other from the outside. The space between the two heads and the tube plate is used to distribute or collect the fluids inside the tube. The two fluids do not mix with each other, but only exchange heat through the tube wall.
Advantages: simple and compact structure, high pressure resistance, low cost and easy to clean the tube side.
Disadvantages: Risk of blockage when the tube is damaged or needs to be replaced.
When the difference between the wall temperature of the tube bundle and the shell or the coefficient of linear expansion of the material is large, a large thermal stress will be generated in the shell and the tube bundle. A flexible compensation ring (also called expansion joint) should be installed on the shell to reduce the thermal stress.
Fixed Tube Heat Exchanger,Tubular Exchanger,Tema Heat Exchanger,Fixed Tube Sheet Heat Exchanger
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com