The application of drying equipment in the pharmaceutical industry is also very common. The improvement of the technological content of the drying equipment in China is yielding gratifying results. With the emphasis on human beings on environmental protection, the dryer's environmental protection measures have been improved to reduce dust and exhaust gas. Leakage, etc., will also be the direction of in-depth research.
At present, in the domestic sales of drying equipment, economical drying equipment accounts for about 50%, to meet the needs of the domestic market; universal drying equipment accounts for about 45%, to achieve large-scale production; advanced drying equipment accounts for about 5% , The variety greatly increased; the economical drying equipment reached the capacity of bulk export, the universal drying equipment gradually expanded exports, and the export of high-grade drying equipment achieved breakthroughs.
It is understood that according to the special planning requirements for the development of drying equipment, domestically produced drying equipment will account for more than 50% of the domestic market demand by 2015. The functional components will be fully equipped and the self-sufficiency rate will reach 60%. Systems with independent intellectual property rights account for the drying equipment. 75% of total production.
Realize the industrialization of key functional components and lay the foundation for the upgrade of drying equipment products; develop high-precision digital measuring instruments and tools for middle and high-grade drying equipment; implement advanced drying equipment demonstration projects to meet the needs of national key projects.
Enterprises must become the main body of technological innovation, should be connected with universities and scientific research units in various forms to make the resources be reasonably allocated and utilized, and effectively cultivate and develop the innovative capabilities of enterprises; also continue to reform and open policy, to be widely Introduce and absorb; new capabilities are not introduced, we must expand the combination of technology and trade, and accelerate independent innovation. Innovation, introduction, digestion, absorption, transformation, and independent innovation are all less.
Nowadays, China has put forward many quality requirements for dryers. Not only manufacturers, including various components, but also countries have proposed the same measures. The market reaction shows that the chemical industry expects that the dry equipment manufacturing industry will adjust the product structure according to the requirements of high quality, low energy consumption, and environmental protection, further strengthen basic research, and solidify the foundation for applied research and development.
In terms of technology, research on automation, testing, manufacturing processes, material design, and other aspects of materials has been strengthened. In terms of applied research and development, it is necessary to focus on international exchanges and cooperation, but also on the protection of intellectual property rights; it is necessary to pay attention to the development of new technologies and new applications, but also to focus on innovation and innovation in traditional processes and traditional applications.
Policy support is guaranteed, and relevant companies must seize the opportunity to make innovations and progress on the basis of the protection of relevant policies of government departments. Under the support of independent innovation and policies, enterprises must conform to the trend of the times and must adapt to market trends.
At present, in the domestic sales of drying equipment, economical drying equipment accounts for about 50%, to meet the needs of the domestic market; universal drying equipment accounts for about 45%, to achieve large-scale production; advanced drying equipment accounts for about 5% , The variety greatly increased; the economical drying equipment reached the capacity of bulk export, the universal drying equipment gradually expanded exports, and the export of high-grade drying equipment achieved breakthroughs.
It is understood that according to the special planning requirements for the development of drying equipment, domestically produced drying equipment will account for more than 50% of the domestic market demand by 2015. The functional components will be fully equipped and the self-sufficiency rate will reach 60%. Systems with independent intellectual property rights account for the drying equipment. 75% of total production.
Realize the industrialization of key functional components and lay the foundation for the upgrade of drying equipment products; develop high-precision digital measuring instruments and tools for middle and high-grade drying equipment; implement advanced drying equipment demonstration projects to meet the needs of national key projects.
Enterprises must become the main body of technological innovation, should be connected with universities and scientific research units in various forms to make the resources be reasonably allocated and utilized, and effectively cultivate and develop the innovative capabilities of enterprises; also continue to reform and open policy, to be widely Introduce and absorb; new capabilities are not introduced, we must expand the combination of technology and trade, and accelerate independent innovation. Innovation, introduction, digestion, absorption, transformation, and independent innovation are all less.
Nowadays, China has put forward many quality requirements for dryers. Not only manufacturers, including various components, but also countries have proposed the same measures. The market reaction shows that the chemical industry expects that the dry equipment manufacturing industry will adjust the product structure according to the requirements of high quality, low energy consumption, and environmental protection, further strengthen basic research, and solidify the foundation for applied research and development.
In terms of technology, research on automation, testing, manufacturing processes, material design, and other aspects of materials has been strengthened. In terms of applied research and development, it is necessary to focus on international exchanges and cooperation, but also on the protection of intellectual property rights; it is necessary to pay attention to the development of new technologies and new applications, but also to focus on innovation and innovation in traditional processes and traditional applications.
Policy support is guaranteed, and relevant companies must seize the opportunity to make innovations and progress on the basis of the protection of relevant policies of government departments. Under the support of independent innovation and policies, enterprises must conform to the trend of the times and must adapt to market trends.
Mobility Scooter,Mobility Scooter For Elderly,Electric Mibility Scooter,Disabled Mobility Scooters
YUMBOMOBILITY LTD , https://www.yumbomobility.com