China Automotive Network Road Sweeper Columns Listed by the Ministry of Industry and Information Technology of China Road Sweeper Vehicles Announcement All 6 Categories 111 Manufacturers 98 Road Sweeper Brands 770 Sweeper Products, Latest Road Sweeper Announcement, Environmental Notices , fuel announcements, exemption announcements, pictures, news, and the most timely information on prices of road sweepers.
Basic configuration product name Dongfeng bully (Jinba) sweeping car Chassis model EQ1060TJ20D3
Operation procedure 1: Cleaning work 1 Turn on the power of the control box and point the control valve to the sub valve position 2 Start the auxiliary machine 3 Turn the slave clutch control button to the closed position and the fan starts to work 4 Point the vacuum box control to a lowered position 5 Point the left or right control to the down position 6 Turn the left or right rotary control to the forward position (count clockwise in the left and counterclockwise in the right) 7 Point the left spray, right spray, and rear spray water control knobs to the open position 8 Point the pump control knob to the open position 9 The vehicle travels at the appropriate speed and starts cleaning action 2: The end of sweeping 1 The vehicle stops driving 2 Point the Pump Control, Left Spray Control, Right Spray Control, Rear Spray Control to Off Position 3 Point the broom control to the middle 4 Point the swash plate control to the ascending position and then to the middle position 5 Point the vacuum box control knob up and then back to the middle position 6 Point the secondary engine clutch control knob to the sub-position and then to the middle position 7 Point the control valve control button to the middle position 8 Shutdown the secondary engine 9 Turn off the power to the control box. 3: Unload the trash 1 Turn on the power to the control box, and point the control valve's control button to the position of the main valve. 2 Start the vehicle's main engine 3 Depress the vehicle clutch 4 Open the vehicle's additional oil pump clutch switch (pull outward) 5 Loosen the vehicle clutch at an appropriate speed 6 Point the rear door control knob on the control box to the open position, and then to the middle position after 5 seconds 7 Point the car control button to the up position. At any time according to the inclination of the car box, you can point the control button to the middle position. At this time, the car tilts up and stops. 8 Garbage Cleaning 9 When the garbage is cleaned, point the control button of the car to the lowered position. After the car is fully returned, point the control button to the middle position. 10 Point the rear door control to the off position, and then to the middle position after 10 seconds 11 Clean up the end of rubbish 12 Depress the vehicle clutch 13 Close the additional pump clutch control knob (pull inwards) 14 Loosen the vehicle clutch at an appropriate speed 15 Point the control valve of the control box to the middle position 16 Switch off the control box
Maintenance and maintenance 1-2 years maintenance: During the warranty period, the car is in its peak period in the first two years, but at least within two years, most of the cars should be replaced with batteries, although there is a “observation window†on the battery, as long as it is green. You can continue to use it. Failure performance is that although the whole car has electricity, but can not start the engine, starter can not turn at the moment of ignition, then all warning lights on the instrument panel mad flash! Don't worry too much. It's because of current instability. They are not bad yet. In addition, the two-year compulsory brake fluid replacement period. Brake fluid is very easy to absorb moisture, if there is moisture entering the oil system, the high temperature generated during braking will vaporize this part of water. When you step on the brake, only the part of air is compressed. The moving piece cannot rub with the disc accurately and forcefully. 2-3 years maintenance: Replace brake pads and fuel pump. The brake system is one of the most important parts of a car and is a "safety item." If the engine has a faulty car, it cannot go, but if the brake has a fault, it will be a big problem. . . Must always check strictly. Usually in the use of pay attention to the wear of the four front and rear brake discs, whether the surface is smooth, if you find a groove in the brake disc, immediately repair and replacement, brake disc certainly failed, brake disc light To "disc" is to polish it, but also to replace it. 4 years maintenance: When the sweeper runs up, it is not as smooth as a new car. If this happens, it is time to check the shock absorber of the car. If the spring of the shock absorber is no longer flexible, it will shake violently at high speeds. It is very simple to check whether the shock absorber is ineffective. Press the four corners of the body and press it hard. If the body does not shake back more than once or twice, it will be normal. If it is constantly up and down, it looks very flexible. It's bad. 5 year maintenance: Be careful when the timing belt is replaced. If it is not replaced in time, the car suddenly breaks when it travels halfway, and the maintenance cost to be paid back is relatively high. The main parameter of the timing belt replacement is mileage instead of time. It is advisable to replace it slightly within the prescribed mileage.
Why sweeper uses require the use of sweeper? First, the traditional answer: sweeping vehicles used to sweep the floor, washing vehicles used to clean and dry all kinds of ground. Second, the professional answer: Road sweepers not only solve the difficulties but also for the user to obtain more profits. Third, sweeping vehicles can solve the following problems: 1. The health problems of people living in a dusty environment; 2. Environmental indicators required by national laws or local regulations; 3, due to dust or garbage caused by excessive premature damage to the road surface; 4. The problem of dust contamination in the production workshop products; 5. Dust contamination of fixed or moving machinery in the production workshop; Fourth, can bring greater profits (or savings): 1. The cleaning system for sweeping vehicles is equivalent to 6-40 times of manual labor; 2. Reducing the degree of dust pollution to the environment (saving time and money, reducing the manual cleaning of products, cleaning and maintenance of mechanical equipment, and periodic environmental hygiene work, etc.) 3, improve work efficiency, while improving the operator's work enthusiasm; 4. A well-groomed environment not only improves the image of the city, but is also more conducive to the construction of urban culture and the enthusiasm of the citizens. V. Comparison of mechanical and manual sweeper vehicles 1, the work efficiency, the same area of ​​work time greatly reduced; 2, the cost of cleaning, it is certain that the cleaning cost of the mechanical unit area is even lower than the manual; 3, cleaning effect, machinery can avoid the uneven use of cleaning agents, cleaning effect is not uniform; 4, safety performance, so that the cleaners are in a safe environment (too many vehicles on the road, their own safety awareness is not strong) 5, economic return, taking a car as an example, how much money it spent on the day it stopped using is its real price. In addition to investment costs, there are operating costs and manpower costs.
Dongfeng Xiaoba Wang Road Sweeper Parameters Vehicle Name: Dongfeng XB Wang Sweeper Chassis Model: EQ1070T35DJ3AC Rated Quality: 1920(Kg)
With the optional chassis cab. Road sweeper special function description: [1] Road sweeper conversion production related instructions: 1, high wear-resistant automatic clutch drive special fan work to ensure that the auxiliary engine no-load start and stop. 2. The main imported hydraulic components adopt integrated superposition and the electro-hydraulic centralized control of the cab is convenient. 3, stainless steel water tank material box, work water tank does not have residual water. 4, anti-collision anti-collision fluid control automatic avoidance function. 5, the rear floating nozzle can automatically adjust to uneven conditions on the ground, debugging and maintenance. 6.Adjustable mist spraying water pressure dust, perfectly eliminate secondary pollution while saving water. 7, streamlined design makes you pleasing, low fuel consumption to your savings, low noise gives you a warm enjoyment. It is widely used in cleaning and cleaning operations in urban roads, squares, airports, ports, highways, and large factories and mines. For the use and maintenance of road sweepers and sprinklers, the “Provisional Regulations†pointed out that the operating vehicles should be cleaned in a timely manner to ensure that the vehicles are clean and tidy; cleaning and watering vehicles must work on designated routes, and non-range driving is strictly prohibited. Use; For large garbage or hard objects that can not be removed by sweepers, they should be promptly removed from the vehicle to ensure that the cleaning quality and equipment are not damaged; at the same time, the side brush and suction port of the sweeper should be adjusted according to the conditions of the road surface. The vehicle must be sprayed on the shower to avoid secondary dusting. The sprinkler must collect water at a certain point, and it is prohibited to take water illegally. When operating, the vehicle should operate according to the prescribed speed, but also civilized operations, strictly abide by the traffic rules. For example, from 0:00 to 0:00, the operation should be flashing and the sirens should not be disturbed. The sprinkler and washing operations should be controlled with proper water pressure and speed to avoid impeding the safety of pedestrians and traffic. Cleaning and watering operations should try to avoid traffic flow and traffic rush hour. , to play prompt music during the day, and to open the width lamp at night. In addition, for the degree of cleanliness of cleaning and rinsing, the "Provisional Regulations" also put forward specific requirements: After the operation, it must reach the true colors of roads, there is no obvious waste, and there is no obvious gray sand belt. Clean sweeping truck operation speed shall not exceed 15 kilometers The "Regulations" clearly define the speed of the vehicle when cleaning. The speed of sweeping vehicles is normally 5-8 kilometers per hour and 8-15 kilometers per hour for cleaning operations. For high-pressure flushing and sprinkler operations, the speed of the sprinkler should be 8-10 km/h. The road surface after sweeping and rinsing operations must achieve road visibility, no obvious waste, no obvious ash belt. In the operation requirements of domestic garbage trucks, the "Provisional Regulations" pointed out that domestic garbage (food and kitchen garbage) should be loaded with fully enclosed transport tools, and there should be a classified collection function for the classification of domestic garbage. At the same time, domestic garbage transport vehicles should With anti-odor diffusion, anti-sagging function, installation of traveling and loading and unloading recorders, the compression truck should have anti-leakage liquid leakage or sewage collection device. Road Sweeper, Sprinkler: No whistle nuisance In the use and maintenance of road sweepers and sprinklers, the “Provisional Regulations†pointed out that the operating vehicles should be cleaned in a timely manner to ensure that the vehicles are clean and tidy; cleaning and watering vehicles must work on designated routes, and non-range driving is strictly prohibited. Use; For large garbage or hard objects that can not be removed by sweepers, they should be promptly removed from the vehicle to ensure that the cleaning quality and equipment are not damaged; at the same time, the side brush and suction port of the sweeper should be adjusted according to the conditions of the road surface. The vehicle must be sprayed on the shower to avoid secondary dusting. The sprinkler must collect water at a certain point, and it is prohibited to take water illegally. When operating, the vehicle should operate according to the prescribed speed, but also civilized operations, strictly abide by the traffic rules. For example, from 0:00 to 0:00, the operation should be flashing and the sirens should not be disturbed. The sprinkler and washing operations should be controlled with proper water pressure and speed to avoid impeding the safety of pedestrians and traffic. Cleaning and watering operations should try to avoid traffic flow and traffic rush hour. , to play prompt music during the day, and to open the width lamp at night. For the use and maintenance of road sweepers and sprinklers, the “Provisional Regulations†pointed out that the operating vehicles should be cleaned in a timely manner to ensure that the vehicles are clean and tidy; cleaning and watering vehicles must work on designated routes, and non-range driving is strictly prohibited. Use; For large garbage or hard objects that can not be removed by sweepers, they should be promptly removed from the vehicle to ensure that the cleaning quality and equipment are not damaged; at the same time, the side brush and suction port of the sweeper should be adjusted according to the conditions of the road surface. The vehicle must be sprayed on the shower to avoid secondary dusting. The sprinkler must collect water at a certain point, and it is prohibited to take water illegally. When operating, the vehicle should operate according to the prescribed speed, but also civilized operations, strictly abide by the traffic rules. For example, from 0:00 to 0:00, the operation should be flashing and the sirens should not be disturbed. The sprinkler and washing operations should be controlled with proper water pressure and speed to avoid impeding the safety of pedestrians and traffic. Cleaning and watering operations should try to avoid traffic flow and traffic rush hour. , To play hint music during the day, to turn on the width lamp at night, etc.
Basic configuration product name Dongfeng bully (Jinba) sweeping car Chassis model EQ1060TJ20D3
Actual volume (cubic) 4-4.5 Total weight (kg) 5255 Engine horsepower 90PS Rated load quality (Kg) 1500,1435 Engine Name Yuchai, Chaoyang, Yunnei, Quanchai Engine Type: Yuchai (YC4F90-30) Toward Chai (CY4102-C3F) Yunnei (YN27CR) Full-Chai (4D22E) Emission Standard III Dimensions (MM) 5950×1980×2320 Fuel Type Diesel Number of tires 6 Tire Specifications 7.00-16, 6.50-16 Wheelbase (MM) 3300 The maximum speed (km/h) 90 Front track 1506 Rear track 1466 Performance Introduction The four-sweep and suction cups are combined to achieve suction and suction. The scanning and suction capacity is excellent. The two sides of the broom can work at the same time or can work independently on one side. The cleaning mechanism is simple and reliable, and it is difficult to damage. The cleaning operation width is 2.8-3 m, and the cleaning speed is every hour. For 5-20 km, the fuel consumption for cleaning operations is as low as 2.5L per 10,000 m2. Water can be sprayed during cleaning to completely eliminate secondary environmental pollution. After inspection, excellent performance. Dedicated configuration All stainless steel trash cans, clean water tanks, hydraulic oil pump imported from Italy, long life, stable and reliable, low failure rate; hydraulic valve imported from Germany solenoid valve; hydraulic pipeline using German standard technology sealing structure, anti-vibration, High sealing reliability, no leaking sealing effect, and key electronic control components using Schneider technology from France. The cleaning system is powered by the auxiliary engine and does not interfere with the power of the entire vehicle. The control box is in the cab and the electric control of each system is centralized, which is easy to operate. Appearance modeling computer design, high side skirt, surface transition, the overall coordination and symmetry; the vehicle consists of chassis, auxiliary engine, fan, electromagnetic control valve, dustbin, water tank, suction cup, broom, water spray system, hydraulic system, electronic control system, etc. composition. Factory price offers sweep brush.
Operation procedure 1: Cleaning work 1 Turn on the power of the control box and point the control valve to the sub valve position 2 Start the auxiliary machine 3 Turn the slave clutch control button to the closed position and the fan starts to work 4 Point the vacuum box control to a lowered position 5 Point the left or right control to the down position 6 Turn the left or right rotary control to the forward position (count clockwise in the left and counterclockwise in the right) 7 Point the left spray, right spray, and rear spray water control knobs to the open position 8 Point the pump control knob to the open position 9 The vehicle travels at the appropriate speed and starts cleaning action 2: The end of sweeping 1 The vehicle stops driving 2 Point the Pump Control, Left Spray Control, Right Spray Control, Rear Spray Control to Off Position 3 Point the broom control to the middle 4 Point the swash plate control to the ascending position and then to the middle position 5 Point the vacuum box control knob up and then back to the middle position 6 Point the secondary engine clutch control knob to the sub-position and then to the middle position 7 Point the control valve control button to the middle position 8 Shutdown the secondary engine 9 Turn off the power to the control box. 3: Unload the trash 1 Turn on the power to the control box, and point the control valve's control button to the position of the main valve. 2 Start the vehicle's main engine 3 Depress the vehicle clutch 4 Open the vehicle's additional oil pump clutch switch (pull outward) 5 Loosen the vehicle clutch at an appropriate speed 6 Point the rear door control knob on the control box to the open position, and then to the middle position after 5 seconds 7 Point the car control button to the up position. At any time according to the inclination of the car box, you can point the control button to the middle position. At this time, the car tilts up and stops. 8 Garbage Cleaning 9 When the garbage is cleaned, point the control button of the car to the lowered position. After the car is fully returned, point the control button to the middle position. 10 Point the rear door control to the off position, and then to the middle position after 10 seconds 11 Clean up the end of rubbish 12 Depress the vehicle clutch 13 Close the additional pump clutch control knob (pull inwards) 14 Loosen the vehicle clutch at an appropriate speed 15 Point the control valve of the control box to the middle position 16 Switch off the control box
Maintenance and maintenance 1-2 years maintenance: During the warranty period, the car is in its peak period in the first two years, but at least within two years, most of the cars should be replaced with batteries, although there is a “observation window†on the battery, as long as it is green. You can continue to use it. Failure performance is that although the whole car has electricity, but can not start the engine, starter can not turn at the moment of ignition, then all warning lights on the instrument panel mad flash! Don't worry too much. It's because of current instability. They are not bad yet. In addition, the two-year compulsory brake fluid replacement period. Brake fluid is very easy to absorb moisture, if there is moisture entering the oil system, the high temperature generated during braking will vaporize this part of water. When you step on the brake, only the part of air is compressed. The moving piece cannot rub with the disc accurately and forcefully. 2-3 years maintenance: Replace brake pads and fuel pump. The brake system is one of the most important parts of a car and is a "safety item." If the engine has a faulty car, it cannot go, but if the brake has a fault, it will be a big problem. . . Must always check strictly. Usually in the use of pay attention to the wear of the four front and rear brake discs, whether the surface is smooth, if you find a groove in the brake disc, immediately repair and replacement, brake disc certainly failed, brake disc light To "disc" is to polish it, but also to replace it. 4 years maintenance: When the sweeper runs up, it is not as smooth as a new car. If this happens, it is time to check the shock absorber of the car. If the spring of the shock absorber is no longer flexible, it will shake violently at high speeds. It is very simple to check whether the shock absorber is ineffective. Press the four corners of the body and press it hard. If the body does not shake back more than once or twice, it will be normal. If it is constantly up and down, it looks very flexible. It's bad. 5 year maintenance: Be careful when the timing belt is replaced. If it is not replaced in time, the car suddenly breaks when it travels halfway, and the maintenance cost to be paid back is relatively high. The main parameter of the timing belt replacement is mileage instead of time. It is advisable to replace it slightly within the prescribed mileage.
Why sweeper uses require the use of sweeper? First, the traditional answer: sweeping vehicles used to sweep the floor, washing vehicles used to clean and dry all kinds of ground. Second, the professional answer: Road sweepers not only solve the difficulties but also for the user to obtain more profits. Third, sweeping vehicles can solve the following problems: 1. The health problems of people living in a dusty environment; 2. Environmental indicators required by national laws or local regulations; 3, due to dust or garbage caused by excessive premature damage to the road surface; 4. The problem of dust contamination in the production workshop products; 5. Dust contamination of fixed or moving machinery in the production workshop; Fourth, can bring greater profits (or savings): 1. The cleaning system for sweeping vehicles is equivalent to 6-40 times of manual labor; 2. Reducing the degree of dust pollution to the environment (saving time and money, reducing the manual cleaning of products, cleaning and maintenance of mechanical equipment, and periodic environmental hygiene work, etc.) 3, improve work efficiency, while improving the operator's work enthusiasm; 4. A well-groomed environment not only improves the image of the city, but is also more conducive to the construction of urban culture and the enthusiasm of the citizens. V. Comparison of mechanical and manual sweeper vehicles 1, the work efficiency, the same area of ​​work time greatly reduced; 2, the cost of cleaning, it is certain that the cleaning cost of the mechanical unit area is even lower than the manual; 3, cleaning effect, machinery can avoid the uneven use of cleaning agents, cleaning effect is not uniform; 4, safety performance, so that the cleaners are in a safe environment (too many vehicles on the road, their own safety awareness is not strong) 5, economic return, taking a car as an example, how much money it spent on the day it stopped using is its real price. In addition to investment costs, there are operating costs and manpower costs.
Dongfeng Xiaoba Wang Road Sweeper Parameters Vehicle Name: Dongfeng XB Wang Sweeper Chassis Model: EQ1070T35DJ3AC Rated Quality: 1920(Kg)
| The main technical parameters | |||
| product name: | Dongfeng bully sweeper | Dimensions: | 5750X2090X2360(mm) |
| Chassis model: | EQ1070T35DJ3AC | Carriage size: | XX (mm) |
| Total quality: | 7495 (Kg) | Approach/Departure angle: | 20/13 (°) |
| Rated quality: | 1920 (Kg) | Front suspension and rear suspension: | 1115/1335 (mm) |
| Maintenance quality: | 5380 (Kg) | The maximum speed: | 95(km/h) |
| Vehicle remarks: | With the optional chassis cab. | ||
| Chassis parameter parameters | |||
| Chassis model: | EQ1070T35DJ3AC | Fuel type: | Diesel |
| Axis number: | 2 | Front track: | 1586 (mm) |
| Wheelbase: | 3300 | Rear track: | 1530 (mm) |
| Cab ride number: | 3 | Number of springs: | 8/9+5 |
| Number of tires: | 6 | Axle load: | 3195/4300 |
| Tire specifications: | 7.00R16, 7.00-16 | ||
| Emission Standards: | GB3847-2005, GB17691-2005 State III | ||
Bridge steel can be exposed to the atmosphere without painting. It begins to rust in the same way as ordinary carbon Steel Plate. But soon the alloying elements in it cause a protective surface layer of fine-textured rust to form, thereby suppressing corrosion rate. Bridge steel plate a good resistance to corrosion than other steel plate, it has smallest alloy elements not like stainless steel and its price is more cheaper than stainless.In this way. The bridge steel helps to reduce lifecycle costs and environment burdens in a wide range of applications.
Bridge Steel Plate,Bridge Steel Sheet,Carbon Steel Plate,Steel Astm Plate
Shandong Guanzhou Iron and Steel Group Co., Ltd , https://www.shansteelsupply.com