2. If the production is interrupted, the main drive and heating stop. When the power supply is restored, the barrels must be reheated to the specified temperature and kept warm for a period of time before the extruder can be started.
3. After 500 hours of use of the extruder, there will be iron scraps or other impurities from the gear box. Therefore, the gear should be cleaned and the gearbox oil should be replaced at the same time.
4. If the steering fullness of the meter and the pointer is found, check whether the contact of the edge such as the thermocouple is good.
Second, the daily maintenance of the extruder 1, the material is not allowed to have debris, metal and sand and other hard materials are strictly prohibited to enter the hopper and extruder.
2. When opening the cylinder cover or the exhaust cover, prevent foreign objects from falling into the host.
3, to have enough warm-up time, manual driving before driving should be brisk. Generally, it should be kept at a constant temperature for 2 hours after reaching the process set temperature.
4. The screw can only be started at low speed, and the idle time is no more than 3 minutes.
Jump Machinery can customize the most suitable solution for customers according to customer's requirements and budget. We can supply service from A to Z about your project, not only machine manufacturing, installation Commissioning, technical training, after-sales service, but also before-sales service, including factory building Construction drawings,facilities layout, and water, electricity, boiler steam. I can go to your factory help you to design the layout on your worksite and draft the implement plan, program schedule and expense estimation in each stage of project untill you will startup the project.
Turnkey Food Production Line,Turnkey Food Production Line Banana Milk Production Line,Turnkey Food Production Line Bread Production Line,Turnkey Food Production Line Pasta Production Line
Jump Machinery (Shanghai) Limited , https://www.shanghaimachineries.com