High-Frequency Pipe Welding Lines For Carbon Steel
Â
High frequency welded pipe mill is the special equipment producing welded steel pipe and profile pipe for industries such as metallurgy,construction,transportation,machinery,vehicles and so on.Take cold or hot rolled steel as raw materials,through cold formed and high frequency welding method to produce the round pipe,square pipe and rectangle pipe.
 Â
|
 Model |
Production (Pipe) Size Range |
 Producing Speed(m/min) |
||
Round Pipe OD(mm) |
Sq.& Rect. Pipe(mm) |
Thickness(mm) |
||
JF20 |
8-25 |
8*8-20*20 |
0.4-1.2 |
30-100 |
JF32 |
12-38 |
10*10-30*30 |
0.6-2.0 |
30-90 |
JF50 |
16-50 |
13*13-40*40 |
0.7-3.0 |
30-90 |
JF60 |
20-76 |
15*15-60*60 |
0.8-3.5 |
30-90 |
JF76 |
25-76 |
20*20-60*60 |
1.2-4.0 |
20-80 |
JF114 |
48-114 |
40*40-90*90 |
1.5-4.5 |
20-70 |
JF140 |
50-140 |
40*40-110*110 |
1.5-5.0 |
20-60 |
JF165 |
60-165 |
50*50-130*130 |
2.0-6.0 |
20-50 |
JF219 |
89-219 |
70*70-170*170 |
2.0-8.0 |
20-50 |
JF273 |
89-273 |
70*70-200*200 |
3.0-10.0 |
20-50 |
JF325 |
114-325 |
90*90-250*250 |
4.0-12.7 |
15-40 |
JF355 |
114-355 |
90*90-280*280 |
4.0-14.0 |
15-40 |
JF377 |
114-377 |
90*90-300*300 |
4.0-14.0 |
15-40 |
JF406 |
165-406 |
130*130-320*320 |
5.0-16.0 |
15-30 |
JF508 |
219-508 |
170*170-400*400 |
6.0-16.0 |
15-30 |
JF630 |
219-630 |
170*170-500*500 |
6.0-19.0 |
10-25 |
Â
Â
Â
Â
Double head uncoiler → Shear & butt welder → Accumulator → Forming section(flattening unit+mani driving unit+forming unit+guide unit) → High frequency welding unit+ squeeze roller → De-burr frame → Cooling unit → Sizing unit and straightener → Flying saw under computer control → Run out table
Â
Â
Â
      1 Raw material: Low-carbon steel,Â
      2 Thickness of steel strip: 1-4.0mmÂ
      3 The width of steel strip: 60-240mm
      5 O.D. of steel coil: Φ800-Φ1200mm
      6 Maximum weight coil: 2500kgs
B .Dimension range of processing steel pipe
      1 O.D of pipe: Φ20-Φ80mm
      2 Wall thickness: 1.-4.0mm (square pipe :1.2-3.0mm)     Â
      3 Length: 6-12m
      5 High-frequency equipment power: 300 KW (Solid state)
      6 Voltage:380V/440V,50HZ
C.Main components
      1 Uncoiler: 1 setÂ
      2 Shearing and butt-welder: 1 setÂ
      3 Accumulator: 1 setÂ
      4 Forming. Welding &sizing unit: 1 setÂ
      5 Computer-controlled tracking cutting saw: 1 setÂ
      6 Run-out table: 1 setÂ
       7 Solid-state high-frequency welder: 1 set
Â
Â
1.One stop service for customized machine
2.Overseas installation and operating training
3.One year warranty of the whole machine
4.Life-long technical support
Â
Â
Â
Â
Â
Welcome to visit our factory! Â Â http://www.sdjfgg.com
Â
Â
Stamping parts: The most used in hardware processing refers to the molds for steel/non-ferrous metals and other plates at room temperature, which are formed into a specified shape by the pressure required for processing by a press. Automobile shock absorbers are mainly used to suppress the shock of the spring and the impact from the road surface when the spring rebounds after shock absorption. When passing on uneven roads, although the shock-absorbing spring can filter the vibration of the road, the spring itself will reciprocate, and the car shock absorber is used to suppress the jump of this spring. If the shock absorber is too soft, the body will jump up and down. If the shock absorber is too hard, it will bring too much resistance and prevent the spring from working properly. In the process of modifying the suspension system, the hard shock absorber should be matched with the hard spring, and the hardness of the spring is closely related to the weight of the car. Therefore, heavier cars generally use harder automotive shock absorber stamping parts. A device connected to the vibration-inducing crankshaft to counteract the torsional vibration of the crankshaft (that is, the phenomenon that the crankshaft is twisted by the impact of the ignition of the cylinder)
Stamping parts bracket,Shock Absorber Parts
Ningbo Huilexin Technology Co.LTD , https://www.oemshockabsorbers.com