Cast Iron 43512-4100 Hino Brake Drum (PJBD022)

                            Cast Iron 43512-4100 Hino Brake Drum(PJBD022)
Product Feature:
1. Made of premium Quality Solid Iron
2. Guaranteed Factory Fit- No Modification Needed
3. Balanced For improved Vibration Free Braking
4. Meets And Exceeds Factory Safety Standards
5. X-Ray Inspected For Any Possible Defects

Our Advantage:   
1.Metertrial:gray iron HT250/GG25=heavy truck brake drum
2.Weight:20kg-85kg
3.Chermical composition:
C:3.0-3.3%  Si:1.6-1.9%  Mn:0.7-0.9% 
P:<0.12%    S<0.12%
                             
4.Mechanics performance:
Main body degree of hardness:163-255HBS
Testing rod tensile strength:>
5.Design
As per the customers drawings
As per the customers sample
                               
6.Packing
 Usually it is neutral packing. Customization is aslo accpted for us.

7. We are accepted with open new mould

8.We Specialize in all kinds of truck and automobile, such as SCANIA / VOLVO / MERCEDES BENZ / BPW / RENAULT / DAF / MAN/ STYER HOWO / IVECO / KAESSB OHRER / KESSLER / MAZ / SAUER SAF / ROR / TRAILER / GUNITE WEBB / KIC / FUWA / NIHO / NISSAN / JAPAN / MITSUBISHI FOSO / YORK / FRUEHAUF
 

About us: Qingdao PUJIE Industry Co.,Ltd is the expertise of brake drum Industry.
We Supply Brake Products with high quality and ISO Certificate has been passed. Pls feel free to reach out to me if you have any inquiry

Excavator cylinder oil seals

â‘ Hardness:

Due to the scientific synthesis of high-molecular polyurethane elastomer materials using iron rubber, the higher the hardness, the higher the modulus, the smaller the elongation, and the better the wear resistance and heat resistance. Well, in the range of minus 35 degrees Celsius to 100 degrees Celsius, and at a pressure of 60 to 70 MPa, the maximum sealing performance can be guaranteed.

â‘¡Pressure resistance:

The use of viscoelastic seals made of nitrile rubber is the most complete protection against damage caused by back pressure. In the range of minus 55 degrees Celsius to 100 degrees Celsius, and under a pressure of 21MPa, due to the rubber The seal is often in a compressed state, so the compression performance of the rubber seal must be considered. It not only achieves enhanced anti-climbing performance and low friction resistance, but also has good performance in dealing with special low-temperature oil, and can also be used in combination with Anti-wear Ring double-purpose retaining ring BRL type.

â‘¢Prevention of oil leakage:

Sealing products made of polytetrafluoroethylene and nitrile rubber/PTFErubber; or seals made of nylon resin and nitrile rubber, which can be used in a wide range of applications with large pressure changes and fast sliding speeds According to the working condition, the input hydraulic pressure cutout is designed on the end face of the polytetrafluoroethylene ring to prevent penetration leakage. The maximum working temperature environment is minus 40 degrees Celsius to 160 degrees Celsius; the maximum working pressure is 50MPa.

SPGW piston seal

Material:PTFE+rubber elastomer+reinforced modified nylon
Temperature:Nitrile rubber -40~100℃
Speed:=1.0m/s
Pressure:≤50mpa

SPGO piston seal

Material:PTFE+rubber elastomer
Temperature:Nitrile rubber -40~110℃
Speed:=1.0m/s
Pressure:≤35mpa

SRUV piston rod seal

Material:NBR+thermoplastic polyurethane
Temperature: -35`90℃
Speed:=0.5m/s
Pressure:≤40mpa

SRS piston rod seal

Material:PTFE+NBR
Temperature:-40~110℃
Speed:=1.0m/s
Pressure:≤40mpa

SRCB piston rod buffer seal

Material:Polyurethane+modified polyoxymethylene
Temperature: -35~110℃
Speed:=1.0m/s
Pressure:≤50mpa

SRU piston rod seal

Material:Polyurethane
Temperature:-35~100℃
Speed:=1.0m/s
Pressure:≤40mpa

SRD iron case dust prevention

Material:Polyurethane+metal skeleton material
Temperature:-40~110℃
Speed:=1.0m/s

SRDI soft dustproof

Material:polyurethane
Temperature:-40~110℃
Speed:=1.0m/

SDS Dumbbell Seal

Material:polyurethane
Temperature: -35~110℃
Speed:=0.5m/s
Pressure:≤50mpa

SPG piston combination seal

Temperature:

NBR+Polyurethane + Modified Polyoxymethylene

Temperature:-35`110℃

Speed:=0.3m/s

Pressure:≤70mpa

SRNL piston rod seal

Material

NBR+Polyurethane + Modified Polyoxymethylene

Temperature:-35`110℃

Speed:=0.3m/s

Pressure:≤70mpa

SRDF Piston Rod Seal

Material

Polyester rubber

Temperature:-40`100℃

Speed:=1.0m/s

SDY Y-seal

Material:Polyurethane

Temperature:-35~110℃

Speed:=0.5m/s

Pressure:≤70mpa

KZT anti fouling ring

SDS Steffel

Piston main oil seal

oil seals,hydraulic oil seal,track link oil seal,TCV oil seal

Safe Seal Technology Co., Ltd. , https://www.jssafeseal.com