Car Dashboard Spray Polish for Cockpit

Posted on

  • Model NO.: TE-8019
  • Capacity: 300 - 500ml
  • Volume: 450ml
  • Trademark: TEKORO
  • Origin: Guangdong, China
  • Type: Lustre Adding Car Cleaning Chemical
  • Brand: Tekoro
  • Validity: Three Years
  • Specification: CE, RoHS, SGS, GMP
Tekoro Dashboard and Leather Wax can protect leatheroid, plastics and rubbers from harmful UV-rays, high temperature and ozone; Prevent panels, leather and tyre from fading, cracking, wrinkling and aging; Enhance and maintain the original gloss of the paint; Eliminate static and dirt retention.

Applications: Dashboard, cockpit, leather, car tire, bumper, etc 
Flavors available: Lemon, Strawberry, Vanilla, Apple, Ocean, New Car, Orange, Cologne, etc 

Item No.: TE-8019
Can Size: 65mm x 158mm H 
Package: 450ml x 12PCS/CTN 
Carton Size: 275x205x205 mm 
20ft Container Loading: 2500 cartons 
Sizes of 650ml or 750ml are also available. 

1. Remove any water, dirt, grease and so on. 
2. Shake the can well before use. 
3. Hold the can 15-20 cm away from surface to be sprayed. 
4. After spraying, gently Polish with a clean, soft, dry cloth. 

1. Keep away from heat, flame, spark and other source of ignition. 
2. Store in a cool, dry place (45c); Avoid direct sunlight. 
3. Do not clash, puncture, or incinerate the can. 
4. Keep out of reach of children.

Packing details:
Volume Pack Qty Carton Specs. Carton Dimension (estimated) Container Qty (cartons)
L(cm) W(cm) H(cm) 20FT' 40HQ
250ml 24pcs/ctn Kraft paper 33 22 17 2500 5600
400ml 12pcs/ctn Kraft paper 27.5 20.5 20.5 2500 5600
650ml 12pcs/ctn Kraft paper 27.5 20.5 29 1816 3294



Plate Flange

The Flat Face Flange has a gasket surface in the same plane as the bolting circle face. Applications using flat face flanges are frequently those in which the mating flange or flanged fitting is made from a casting.

Flat face flanges are never to be bolted to a Raised Face Flange. ASME B31.1 says that when connecting flat face cast iron flanges to carbon steel flanges, the raised face on the carbon Steel Flange must be removed, and that a full face gasket is required. This is to keep the thin, bittle cast iron flange from being sprung into the gap caused by the raised face of the carbon steel flange.

Flat Flange,Slip On Flat Face Flange,Flat Face Blind Flange,Flat Face Weld Neck Flange

Fuyuan Marine Accessories Co., Ltd , https://www.fymarineparts.com