C Style Cable Tray Industry Roll Forming Machine

Posted on

Working Material: Galvanized Sheet(Gi),Cold Roll Steel(CRC),Hot Roll
Thickness: 2.0-2.5mm
Yield Strength: 245-500MPa
Decoiler: Manual/Hydraulic for Options
Side Wall Thickness: 18mm
Shaft: 75mm
Forming Station: 21steps
Cutter Material: Cr12 Tool Steel
Output: About 15-20meters Per Minute
Housing: H500 Beam
Trademark: BMS
Transport Package: Main Body of High Speed Metal Stud and Track Roll
Specification: about 10600*1500*1400mm
Origin: China (Mainland)
Working Material: Galvanized Sheet(Gi),Cold Roll Steel(CRC),Hot Roll
Thickness: 2.0-2.5mm
Yield Strength: 245-500MPa
Decoiler: Manual/Hydraulic for Options
Side Wall Thickness: 18mm
Shaft: 75mm
Forming Station: 21steps
Cutter Material: Cr12 Tool Steel
Output: About 15-20meters Per Minute
Housing: H500 Beam
Trademark: BMS
Transport Package: Main Body of High Speed Metal Stud and Track Roll
Specification: about 10600*1500*1400mm
Origin: China (Mainland)

1. Details of  Cable Tray Industary Roll Forming Machine

Material
Material Thickness(&):2.0-2.5mm
Applicable material:Galvanized Steel Coils, Hot Rolled Coils,Cold Rolled Coils,yield strength 245Mpa or 550Mpa
Machine Components
1)Manual Decoiler: one set
Max. feeding width: 500mm, coil ID range 470mm±30mm

Capacity: Max. 3Ton                            

 

2)   Cold Rolling Mills:

Rollers manufactured from bearing steel GCr15,precision machined,hard Chrome Coated with thickness 0.04mm(for longer life and anti-rust)   ;    

                     

Motor Driving,Gear chain transmission, 27 forming stations and 7 rollers(3 upper rollers and 4down rollers)for straightening and levelling)

Main Motor=15KW  , Frequency speed control
Forming speed approx.12-15m/min
3)Hydraulic Cutting device
hydraulic motor: 11KW, Hydraulic pressure range: 0-16Mpa
Cutting tool material: Cr12, Heat treatment
Cutter frame made from high quality 20mm steel plate by weld
Pre-punching & Pre-cutting,  stop to punching, stop to cutting, 
4)PLC Control System(Touch screen brand:Taiwan WEINVIEW,Inverter brand:Finland VOCAN/Denmark Danfoss ,Encoder brand: Japan Koyo)
Control the quantity and cutting length automatically
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Cut-to-length tolerance≤±1mm
Control Voltage 24V
5) Exit Rack Un-powered, two units             

2. Machine Features of Cable Tray Industary Roll Forming Machine

The advantages of cable tray industary roll forming machine as follows:

1.Easy operation, low maintenance cost
2.Material saving

3.Type of penel is wide used.

4. High requirments for finished products 

Certifications

C Style Cable Tray Industry Roll Forming Machine
 

 

Our Service                                                                                                                                                

C Style Cable Tray Industry Roll Forming Machine
 

Pre-Sales Service

* Inquiry and consulting support. 

* Profile drawing and roll forming solution. 

* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine. 

* Engineers available to service machinery overseas.

Packaging & Shipping

C Style Cable Tray Industry Roll Forming Machine

(1)  Main body of machine

 is naked and covered by plastic film(to protect of dust and corrosion),loaded into container and steadily fixed in 1x40GP container with steel rope and lock catch suitable for long-distance transportation, spare parts are covered by plastic film. 

(2)  With even lifting point in the machine for easy container loading and uploading.

Company information                                                                                                      

Company Show

C Style Cable Tray Industry Roll Forming Machine
                                               

Factory Show

C Style Cable Tray Industry Roll Forming Machine

BMS Machine (formerly named as HF BRAND FORMING MACHINERY CO.,LTD) was established in 1996,which covers an area of MORE THAN 20000 SQUARE METERS. With 20 YEARS PROFESSIONAL EXPERIENCE, we have been the TOP 3 manufacturer and exporter of cold roll forming machines in China. We are an ISO9001 approved company, and have European CE certification (issued by SGS). We have the honor to serve some of the famous companies in the world such as TATA STEEL,BLUESCOPESTEEL, BRADBURY MACHINERY,etc.

We manufacture wide range products of metal sheet cold roll forming machines as follows: 1) for Metal Building Industry/PEB (Pre-Engineering Building): HAYES style quick change CZ purlin machine(including automatic and quick-change type C purlin machine and Z purlin machine), light gauge steel framing machine(LGSF, Howick and SCOTTSDALE style), roof panel forming machine, corrugated panel roll forming machine, curving machine, glazed tile roll forming machine, floor decking machine, ridge cap roll forming machine, cladding facade system forming machine, cut-to-length slitting line etc., as well as some hydraulic shearing machine, hydraulic folding machine for gutter and flashing, etc.

1. Details of  Cable Tray Industary Roll Forming Machine

Material
Material Thickness(&):2.0-2.5mm
Applicable material:Galvanized Steel Coils, Hot Rolled Coils,Cold Rolled Coils,yield strength 245Mpa or 550Mpa
Machine Components
1)Manual Decoiler: one set
Max. feeding width: 500mm, coil ID range 470mm±30mm

Capacity: Max. 3Ton                            

 

2)   Cold Rolling Mills:

Rollers manufactured from bearing steel GCr15,precision machined,hard Chrome Coated with thickness 0.04mm(for longer life and anti-rust)   ;    

                     

Motor Driving,Gear chain transmission, 27 forming stations and 7 rollers(3 upper rollers and 4down rollers)for straightening and levelling)

Main Motor=15KW  , Frequency speed control
Forming speed approx.12-15m/min
3)Hydraulic Cutting device
hydraulic motor: 11KW, Hydraulic pressure range: 0-16Mpa
Cutting tool material: Cr12, Heat treatment
Cutter frame made from high quality 20mm steel plate by weld
Pre-punching & Pre-cutting,  stop to punching, stop to cutting, 
4)PLC Control System(Touch screen brand:Taiwan WEINVIEW,Inverter brand:Finland VOCAN/Denmark Danfoss ,Encoder brand: Japan Koyo)
Control the quantity and cutting length automatically
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Cut-to-length tolerance≤±1mm
Control Voltage 24V
5) Exit Rack Un-powered, two units             

2. Machine Features of Cable Tray Industary Roll Forming Machine

The advantages of cable tray industary roll forming machine as follows:

1.Easy operation, low maintenance cost
2.Material saving

3.Type of penel is wide used.

4. High requirments for finished products 

Certifications

C Style Cable Tray Industry Roll Forming Machine
 

 

Our Service                                                                                                                                                

C Style Cable Tray Industry Roll Forming Machine
 

Pre-Sales Service

* Inquiry and consulting support. 

* Profile drawing and roll forming solution. 

* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine. 

* Engineers available to service machinery overseas.

Packaging & Shipping

C Style Cable Tray Industry Roll Forming Machine

(1)  Main body of machine

 is naked and covered by plastic film(to protect of dust and corrosion),loaded into container and steadily fixed in 1x40GP container with steel rope and lock catch suitable for long-distance transportation, spare parts are covered by plastic film. 

(2)  With even lifting point in the machine for easy container loading and uploading.

Company information                                                                                                      

Company Show

C Style Cable Tray Industry Roll Forming Machine
                                               

Factory Show

C Style Cable Tray Industry Roll Forming Machine

BMS Machine (formerly named as HF BRAND FORMING MACHINERY CO.,LTD) was established in 1996,which covers an area of MORE THAN 20000 SQUARE METERS. With 20 YEARS PROFESSIONAL EXPERIENCE, we have been the TOP 3 manufacturer and exporter of cold roll forming machines in China. We are an ISO9001 approved company, and have European CE certification (issued by SGS). We have the honor to serve some of the famous companies in the world such as TATA STEEL,BLUESCOPESTEEL, BRADBURY MACHINERY,etc.

We manufacture wide range products of metal sheet cold roll forming machines as follows: 1) for Metal Building Industry/PEB (Pre-Engineering Building): HAYES style quick change CZ purlin machine(including automatic and quick-change type C purlin machine and Z purlin machine), light gauge steel framing machine(LGSF, Howick and SCOTTSDALE style), roof panel forming machine, corrugated panel roll forming machine, curving machine, glazed tile roll forming machine, floor decking machine, ridge cap roll forming machine, cladding facade system forming machine, cut-to-length slitting line etc., as well as some hydraulic shearing machine, hydraulic folding machine for gutter and flashing, etc.

High precision Laminating Machine

High precision Laminating Machine

Flying Man high precision lamination machines, can be used to multi-layer precision laminate for raw materials. The function of feeding - laminating – waste discharging - laminating - rewinding is complete, which can realize multiple laminate and multiple discharge at one time. This lamination machine can be used online production, can also be used independently, and combine as one online production line with any Die Cutting Machine, punch, cutting machine.

Flying Man Brand Multilayer Lamination Machine

This lamination machine is a special equipment for the adhesive tape products of mobile phone, computer, LCD and other electronic label industrial. It can be combined with single and double-sided adhesive.

Film Lamination Machine is suitable for laminating and rewinding PET, PE, EVA, PVC, electrostatic membrane, double-side adhesive tape, strips, 3M tape, aluminum foil, copper foil, conductive fabric, foam and etc.

Flatbed die cutting machine application foam


Laminating Machine,Film Lamination Machine,Foam Lamination Machine,Paper Laminating Machine

Suzhou Flying Man Assembly Automation Co., Ltd. , https://www.flyingmans.com