a Regenerative Silica Gel Honeycomb Dehumidifying Dryer

Posted on

  • Model NO.: RHD-X
  • Fan: With Fan
  • Control: Automatic
  • Structure: Overall Mobile
  • Trademark: RHONG
  • Specification: 1850x930x1400mm
  • HS Code: 8419399090
  • Certification: CE, TUV
  • Dehumidification Capacity: 700kg/Hr
  • Suitable Temperature: 150-160degree
  • Type: General
  • Transport Package: Wooden Case
  • Origin: China

RHD series of honeycle dehumifier, together with RDM series of hopper dryer, are used to dry hygroscopic engineer plastics( such as PA, PC, PBT, PET etc.) with high efficiecy. They can connect directly with molding machine or centralizedly dry material.
1. Adopted P.I.D. temperature controller, the equipment can show on screen set temperature and actual temperature.
2. Up-to-date chain-wheel transmission design with more stable performance, to avoid traditional belt's disadvantage under high temperature.
3. Double condensors structure to ensure lower return air temperature and dew point.
4. The dew point of processing wind can reach -40 degree centigrade. A better honeycomb is optional to use so as to make dew point reach -50 degree centigrade.
5. A dew point gauge is optional to use in order to monitor dehumidifying effect anytime.
6. Novel design, nice appearance, easy to move.

Specifications                              
RHD- 30H 50H 80H 120H 150H 200H 300H 400H 500H 700H 1000H 1500H 2000H 3000H 4000H
Dry Air Capacity(m3/h) 30 50 80 120 150 200 300 400 500 700 1000 1500 2000 3000 4000
Regenerating Heater(kW) 3 3 3.5 3.5 4 5.4 7.2 7.2 10 10 15 20 20 32 40
Regenerating Blower(kW) 0.18 0.18 0.18 0.18 0.37 0.37 0.75 0.75 1.5 1.5 2.2 5.5 5.5 9 5.5*2
Process Blower 0.18 0.37 0.75 0.75 1.5 1.5 2.2 3.8 5.5 5.5 9 9*2 13*2 13*3 13*4
(kW)
Pipe Dia. 2 2 2 2 2.5 2.5 3 3 4 4 5 6 8 8 12
(Inch)
Dimensions  
H (mm) 1200 1200 1200 1330 1330 1500 1650 1750 1750 1750 2000 2060 2062 2240 2060
W (mm) 520 520 520 620 620 730 730 850 850 900 1300 1410 1410 2035 2075
D(mm) 750 750 750 860 860 980 980 1150 1150 1300 1650 1800 2150 2150 2250
Weight(kg) 120 130 140 170 210 265 320 330 430 450 700 1010 1300 1600 2200

Pneumatic Cylinder Kits

Cylinder assembly accessories refer to all cylinder assembly parts except the piston rod, cylinder tube and tie rods (some cylinders do not have tie rods).

Cylinder assembly accessories include one front cover and one rear cover, one piston, two Y-type piston seals, one hard-wearing ring, one set of magnetic rings (some cylinders do not have magnetic rings), two cylinder seal O-rings, one piston rod sealing ring, one dustproof, two buffer caps, two buffer screws (with O-ring), one piston rod end thread, one piston fixing bolt, 8 fixing bolts, dustproof air inlet and outlet two caps, one piston rod end thread protection cover.Air Cylinder Tube.

Because the different application needs different strokes of air cylinders, for dealers and distributors, storing a large number of cylinders with fixed strokes will occupy a large amount of inventory funds.Pneumatic Cylinder Tube.

However, storing the Pneumatic Cylinder assembly parts can solve this problem very well. When requires different strokes and then temporarily assembling the cylinder accordingly.Air Cylinder Barrel.


Categories

Common cylinder assembly parts include DNC square cylinder series, ISO standard Metalwork series, SI Mickey Mouse type ISO 15552 cylinder series, SC and SU AirTac standard cylinder series, SDA compact cylinder series, and DSN, MA, MAL mini air cylinder series, etc. .


Matters needing attention when assembling the cylinder

For non-professional cylinder manufacturers, we do not recommend self-assembly to avoid problems caused by incorrectly assembling cylinders.

The following points need to be paid attention to when assembling an air cylinder by yourself:

â—† The inner edge of a pneumatic cylinder needs to be chamfered to facilitate the entry of the piston and sealing ring into the cylinder tube.

â—† Before assembling the piston and cylinder, lubricating grease must be applied to the inner wall of the cylinder to reduce the friction between the sealing ring and the inner wall of the air cylinder.Pneumatic Cylinder Barrel.

â—† The edge of the piston rod end also needs to be chamfered to reduce damage to dust and buffer seals.Pneumatic Cylinder.

â—† Because the end of the piston rod has external threads, special attention should be paid when assembling the piston rod and the front end cover. It is necessary to use the end of the piston rod without threads to pass through the gasket. Otherwise, the inner wall of the gasket is easily cut by the threads and resulting in an air leakage.

â—† For the installation of the tie rod cylinder, it is also necessary to pay attention to the position of the tie rod thread, so that there is enough thread space in the fixing bolts of the front and rear end covers to install the cylinder accessories such as CA, CB mounting brackets, FA/FB flange brackets.Cylinder Tube.

33333

Pneumatic Cylinder Kits,Air Cylinder Kits,Pneumatic Air Cylinder Kits,Aluminum Cylinder Kits

Foshan Weiyingjia Technology Co., Ltd , https://www.wyspneumatic.com