50kn Hydraulic Mooring Winch
1) Drive: hydraulicÂ
2) Single Drum, with drag brake systemÂ
3) Rate pull (1st layer): 50 Tonnes
Specifications:
1) Drive: hydraulic
2) Configuration: horizontal arrangement
3)Â Rope drum: steel wire rope
4)Â Rope speed: complying with ISO requirements
5) Rate pull (1st layer):Â 50 Tonnes
5) Clutch: hydrulic operated
6) Brake: hydraulic operated band failsafe brake
7) Brake Holding: 1st layer static up to 100Tonnes
8) Control: Local/ remote control
9) Paint: as per your specifications
|
Mooring winch |
 | |||||
| Drive | Electric/Hydraulic /Manual Driven | |||||
| Configuration | Single/Double Drum | Â | ||||
| Drum Rope | P.P Rope or SWR | Â | ||||
| Rated Pull | 1 Tones To 150 Tones (1st Layer) | Â | ||||
| Brake Holding | Up To 250 Tonnes ( Static, 1st Layer) | Â | ||||
| Wire Speed | Complying With ISO/Classification Society Requirement | Â | ||||
| Clutch | Manual /Hydraulic Operated Jaw Clutch | Â | ||||
| Brake | Spring Applied Pneumatically or Hydraulic Released Band Brake | Â | ||||
| Release | Emergency Quick Release | Â | ||||
| Control | Local Control Console and remote Control Panel | Â Â |
||||
| Electric/Hydraulic Mooring Winch | |||||
| Model | Drum load | Nominal speed | Holding load | Dia. Of rope | Capacity of rope |
| HTHMW30 | 30 | 15 | 90 | 16 | 150 |
| HTHMW40 | 40 | 15 | 120 | 18 | 150 |
| HTHMW50 | 50 | 15 | 150 | 20 | 150 |
| HTHMW75 | 75 | 15 | 220 | 26 | 150 |
| HTHMW80 | 80 | 15 | 240 | 26 | 150 |
| HTHMW100 | 100 | 15 | 300 | 28 | 150 |
| HTHMW125 | 125 | 15 | 310 | 30 | 150 |
| HTHMW150 | 150 | 15 | 375 | 32 | 150 |
| HTHMW160 | 160 | 15 | 400 | 32 | 150 |
| HTHMW200 | 200 | 9.6 | 500 | 40 | 150 |
| HTHMW250 | 250 | 9.6 | 625 | 44 | 150 |
| HTHMW315 | 315 | 7.8 | 788 | 52 | 150 |
| HTHMW350 | 350 | 7.8 | 875 | 54 | 150 |
| HTHMW400 | 400 | 7.8 | 1000 | 56 | 150 |
Cold Drawn Steel Tube, cold rolled steel pipe unit is made of cold rolled, cold drawn or cold rolled and cold drawn pipe cold working methods of combining production of a complete set of gear combinations, the capillary billet or raw material tube expanding process of cold drawing for zhongtong too much processed is of deep processing of hot rolled steel tubes or welded pipe units. Cold drawn pipe: (1) the basic process pipe material used for hot rolling and rolling tube, (2) tube material inspection, pickling, phosphating, saponification (3) the cold drawing process to the specified inside diameter size (4) finished finishing: including the finished heat treatment, straightening, sampling, cutting head to tail, check (manual inspection and various testing), oil, packaging, warehousing, etc.
High Pressure Fuel Injection Tube
High Pressure Fuel Injection Tube, High Pressure Fuel Rail Injection Tube,CNG High Pressure Fuel Injection Tube,Diesel Engine High Pressure Fuel Tube
Yangzhou Yinhe Machinery Co., Ltd , http://www.yinhesteeltubes.com