13000 盏 Philips LED plant light new plant factory

On September 17, 2014, Osaka Prefecture University disclosed the internal situation of the Greenhouse Clock New Generation (GCN) plant factory at Osaka Prefecture University. The plant uses LEDs for plant cultivation developed by Philips Electronics Japan (Headquarters: Tokyo, Philips for short). The large plant is built in the Osaka Prefecture University Campus and is the fifth largest plant in Japan. It opened on September 19th, October. It was officially put into production in the first ten days. Philips hopes to accumulate technical experience through the plant factory to sell its products in Japan. The plant uses 13,000 Philips GreenPowerLEDProductionModules. This is the first of its kind to be equipped with far-infrared (near 750nm) LED chips that emit red, blue, white and far-infrared light. . The lighting used in plant factories is usually red, blue and white, because red and blue light contribute to plant photosynthesis. The use of far-infrared light at the same time can complete the shape of the leaves during plant growth, improve the efficiency of photosynthesis, and accelerate the growth rate. Osaka Prefecture University said: Because it promotes plant growth and has excellent dust and water resistance (Ansei Masaichi, Director of the Plant Factory Research Center of Osaka Prefecture University), GreenPowerLEDProductionModule is used. Plants such as lettuce are only needed for planting and harvesting. 40 days or so. According to the company, this type of lighting can reduce cultivation time by up to 20% and power consumption by 55% compared to ordinary fluorescent lamps. Since the amount of heat generation is also small, it is also possible to save electricity for air conditioning for managing temperature. The plant factory was built through a joint project of industry, academia and government with a number of companies including Osaka Prefecture University. Covering an area of ​​about 1300m2, it can produce 5,000 green leafy vegetables such as vegetables every day. The vegetables produced will be directly supplied to the supermarkets and restaurants in Osaka Prefecture. Since the vegetables carry less bacteria and have a short transport distance, the storage time is nearly twice that of open-air cultivated vegetables. Although the price will be higher than ordinary vegetables, it will be commercialized by ensuring quality and establishing a stable supply system. If you need it, you can also produce high value-added vegetables such as potassium-free (K) vegetables.

Roller Shutter Profile Extrusion Dies

Aluminum alloy rolling shutter

Composition

Because the aluminum alloy of aluminum alloy roller shutters has low density but relatively high strength, which is close to or exceeds that of high-quality steel, aluminum alloy doors have good plasticity and can be processed into various profiles. They have excellent electrical conductivity, thermal conductivity and corrosion resistance, so they are widely used. Used in the door industry, its usage is second only to steel. Aluminum alloy rolling shutters are used in various places such as shops, high-end residential areas, commercial streets, corporate gates, anti-theft windows, bank entrances, etc. Aluminum alloy is the most widely used non-ferrous metal structural material. Anti-theft aluminum alloy rolling shutters can be repaired. Good anti-corrosion performance, after use, can significantly reduce the wear and noise during operation of rolling shutter doors and windows, and increase the service life of components.

Advantage

1. Safety

This product uses reversal technology when encountering obstacles. When it touches people, cars, etc., it will automatically reverse and return; ensuring the safety of the owner's body and property!

2. Strong

The door panel material is made of high-strength color steel imported from abroad. It is formed into one piece by special hydraulic work, and its strength is twice that of ordinary rolling shutters. The concave and convex parts are just tightly connected to each other, and the curvature is reduced by half!

3. Mute

Both sides of the rolling shutter door are made of special aluminum alloy, which has high strength, smooth trajectory, and the entire integrated door shape. There is almost no sound during use. In such an environment, the silencing rope is replaced, making it perfectly silent!

4. Beautiful

The appearance of the door piece is very three-dimensional and prominent, neatly arranged; the protruding part is of appropriate size, the motor is not exposed, and the whole is simple and beautiful!

5. Easy

It uses high-quality anti-fatigue torsion springs internally. Both sides rise and fall at the same time. It has good balance and long life!

6. Practical

Strong and durable, beautiful appearance, high strength, high toughness, corrosion-resistant aluminum alloy double (single) layer curtain, made of aluminum alloy, resistant to hits and scratches, blocking malicious intrusion from outside the door, and more effective security protection.

The appearance of the aluminum alloy rolling shutter door adopts electrostatic powder spraying process, which has strong weather resistance, anti-aging, rain resistance and corrosion resistance, and has a service life of more than 20 years.

Roller Shutter Profile Extrusion Molds,Roller Shutter Profile Extrusion Moulds,Rolling Shutter Profile Extrusion Dies,Rolling Shutter Profile Extrusion Molds

Foshan Jieliwei Metal Products Co., Ltd. , https://www.foshanjlw.com